Ricoh FV-G030B1 manual 23/37

Page 23

Device Code = 100000

Command		R/W		Save to		Function		Initial		Data Range
No.		R/W		EEPROM		Function		Data		Data Range
No.				EEPROM				Data
54H		R/W		x		X_offset for AOI (8bit: D[7..0])		0		8 <= X <= 648,

55H		R/W		x		X_offset for AOI (16bit: D[15..8])
55H		R/W		x		X_offset for AOI (16bit: D[15..8])				where X =

56H		R/W		x		width for AOI (8bit: D[7..0])
56H		R/W		x		width for AOI (8bit: D[7..0])		648		offset + width

57H		R/W		x		width for AOI (16bit: D[15..8])
57H		R/W		x		width for AOI (16bit: D[15..8])

58 to 5FH						reserved		-	-

60H		R/W		x		camera mode1 (8bit: D[7..0])		00H

61 to 91H						reserved		-	-

92H		R/W		x		iris lens manual adjustment (8bit: D[7..0])		01H

93 to FFH						reserved		-	-

	FV-G030B1	23/37
	User’s Guide Rev. 1.01	23/37
	User’s Guide Rev. 1.01

Image 23

Contents FV-G030B1 User’s Guide Rev GigE Vision VGA Monochrome CCD Camera FV-G030B1Table of Contents RJ45 Connector Connector SpecificationsPower-I/O Connector DC Iris Lens ConnectorFV-G030B1 User’s Guide Rev IOOut Equivalent Circuit for the Input Pin of the I/O ConnectorOr equivalent connector TriggerIn+Vertical Timing Full Scanning Horizontal TimingFixtrig AOI Area of InterestPixel Transferring Image Timing Normal ModePulse Width Trigger Mode Trigger signal With Photocoupler delay Exposure Timing with the Positive Polarity Trigger SignalInput Trigger signal Trigger signalEdge Preset Trigger Mode 13/37 14/37 15/37 Reset Mode Communication Format Communication SettingsCommunication Method Name Descriptions 【Example Code】Reading the data from the command 00H Camera Command List Device Code Camera Control Command21/37 22/37 23/37 Underline settings are the factory default settings Descriptions of the Camera Control Commands Device code25/37 26/37 27/37 28/37 29/37 AGC Descriptions of the Camera Commands Device code31/37 32/37 33/37 GenICam command Device Command Function GenICam Command / Camera Command Reference Table2EH 36/37 37/37

Related manuals

Manual 38 pages 11.47 Kb