Ricoh FV-G030B1 manual 21/37

Device Code = 000000

Command	R/W	Save to	Function		Initial Data		Data Range
No.		EEPROM
58H	R/W	x	frame rate (Hz) (Integer) (16bit: D[7..0])
59H	R/W	x	frame rate (Hz) (Integer) (16bit: D[15..8])				0.72028 to
				89.91172
5AH	R/W	x	frame rate (Hz) (Decimal) (24bit: D[7..0])
						360.33325
5BH	R/W	x	frame rate (Hz) (Decimal) (24bit: D[15..8])
5CH	R/W	x	frame rate (Hz) (Decimal) (24bit: D[23..16])
5DH	R/W	x	I/O signal polarity (8bit: D[7..0])		00H
5EF	R/W	x	gain base offset (16bit：D[7..0])	304			0 to 1,023
5FH	R/W	x	gain base offset (16bit：D[15..8])
60 to 77H			reserved	-		-
78H	R/W	x	test pattern selection (8bit: D[7..0])		00H
79H	R/W	x	image effect selection (8bit: D[7..0])		00H
7A to 7FH			reserved	-		-
80H	R/W		EEPROM control (8bit: D[7..0])		00H
81 to 8FH			reserved	-		-
90H	R/W	x	strobe signal active time (us) (Integer) (24bit: D[7..0])
							0 to
91H	R/W	x	strobe signal active time (us) (Integer) (24bit: D[15..8])	10
						2,000,000
92H	R/W	x	strobe signal active time (us) (Integer) (24bit: D[23..16])
93H	R/W	x	strobe signal active time (us) (Decimal) (8bit: D[7..0])
94 to EFH			reserved	-		-
F0H	R/W	x	signals of the power-/IO connector (8bit: D[7..0])		20H
F1H	R/W	x	user output signal for the power-I/O connector (8bit: D[7..0])		00H
F2 to FFH			reserved	-		-

FV-G030B1	21/37
User’s Guide Rev. 1.01