Philips VR670B/58 Connecting additional devices, Socket EXT.2 AV, AI do not see a test screen

Page 13

CONGRATULATIONS

YOU NOW OWN A NEW

PHILIPS

VIDEO RECORDER

CONTINUEpOK

6	Select this programme number and manually start the TV's channel	ENGLISH
6
	search as if you wanted to save a new TV channel until the 'test
	image' appears.

aI do not see a 'test screen'

b Check the cable connections.

b The video recorder 'transmits' on the 591MHz frequency (channel 36) Repeat the channel search on your TV set.

7Save this programme number setting on your TV set for video recorder operation.

Programme number for video recorder operation

You have now saved a programme number for use by your video recorder as you would a regular TV channel. This programme number must now be used in future for video recorder playback ('video recorder' TV channel).

You can find more details in chapter 'Initial Installation'.

Connecting additional devices

You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the

socket EXT.2 AV. 2 .

Two audio sockets AUDIO OUT L R are located on the back of the video recorder (audio signal output left/right). These can be used to connect stereo systems.

Connecting the video recorder	9

Image 13

Contents Table of contents Remote control Front of the device Additional TV functionsDEC Symbols on your video recorder displayPage Phil AIntroductionDear Philips customer Supplied accessories SpecificationsEnergy consumption 16W Important notes regarding operation Special functions of your new video recorder Preparing the remote control for operation BConnecting the video recorderConnecting your video recorder to the TV set Connecting with a scart cableAV at Connecting with a scart cableMy TV offers me a selection menu for the scart socket AMy screen is empty Connecting without a scart cableSocket EXT.2 AV Connecting additional devicesAI do not see a test screen Programme number for video recorder operationInitial installation CInstalling your video recordingConnecting additional devices What is an on menu?Satellite receiver Decoder allocationDecoder ASound disruptions can occur on several TV channelsManual TV channel search How can I switch off the decoder?What is a special channel? What is hidden behind the settings?What is NICAM? AI dont know the channels for my TV stationsAutomatic TV channel search Using the satellite receiverSorting and clearing TV channels manually Monitor functionDeleting TV channels Setting on menu languageAThe main menu will appear on the screen ATime/date is displayed incorrectly despite manual setting Setting the time and dateNavigation in the screen menu DImportant notes for operationPlaying cassettes EPlaybackWhat does VHS mean? APicture/ sound quality is poorPlaying back Ntsc cassettes Automatic switch of special functionsDisplaying current tape position How can I set the counter to 00000?Still picture / slow motion Searching for a tape position with picture scanningAutomatic search for a tape position index search Instant ViewAThe cassette is ejected Automatic search for a blank space on the tapeOptimising tracking FEliminating picture interferenceOptimising still picture AI cannot reach optimal quality for the still pictureAutomatic switch Recording without automatic switchGManual recording General informationPreventing accidental erasing of cassettes Recording with automatic switch OTR OneLining up recordings assemble cut How can I clear the recording time just setted?Selecting the recording speed SP or LP Confirm with OK To end, press Menu Insert a cassette Switching off Record LinkWhat is VPS/PDC? HProgramming a recording TimerProgramming a recording with ShowView What do I need to know about VPS/PDC?Selecting onetime/daily/weekly recordings Switching on VPS/PDC in the Start input fieldAThe following message appears on the screen Select Prog Recordings Problems and solutions for programmedSTANDBY/ON m EXT.1 AV E1 or EXT.2 AV E2 Programming a recording without ShowViewProgramme numbers of the E1 and E2 scart socket Problem Problem solving for programmed recordingsProgramming a recording with Press Turbo TimerACLK will flash in the video recorder display Will flash Delete programmed recording Press Clear CLIOther functions How can I change back to Automatic SwitchChanging the video colour system Video colour systemsChild lock Switching the on display OSD off or onWill flash in the video recorder display Which settings can I choose? Switch off the clock displayHow can I switch on the clock display? Continuous playback Automatic switchAutomatic switch to Mono What goes on behind the settings?Selecting the sound channel Playing back an audio dubbingWhat is an modulator frequency? What is a modulator?JSuppressing interference Optimising the modulatorHow can I switch the modulator back on? Switching the modulator on / offHotline telephone numbers KBefore you call an engineerWith STANDBY/ON m BAttentionBefore you call an engineer