
CLOCK |
|
YEAR | è 2001 p |
MONTH | 01 |
DATE | 01 |
TIME | 20:00 |
SMART CLOCK | ON |
________________________________
EXITpMENU STOREpOK
7 | Select the next line with P ;q or P =r . | ENGLISH |
6 | Check the year in line 'YEAR'. If required, please change the year with |
|
| the number buttons |
|
8Check if the displayed settings for 'MONTH', 'DATE' and 'TIME' are correct.
9When all information is correct, save by pressing OK . 'STORED' will briefly flash in the video recorder display.
The initial installation is now complete.
Satellite receiver
If you are connecting a satellite receiver, please read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must install it as described in the next section.
aSound disruptions can occur on several TV channels
b If sound disruptions should occur for several saved TV channels or there is no sound at all, it is possible that the incorrect TV system was saved for this TV channel. In the chapter 'Manual TV channel search' you will find the information on how to change the TV system.
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a commercially purchased or hired decoder without disturbances. You can connect such a decoder (descrambler) to this video recorder. The following function will automatically activate the connected decoder for the desired TV channel.
1Switch the TV on. If applicable, select the programme number for the video recorder operation.
2Use the buttons P ;q , P =r on the video recorder or the number buttons
3Press the button MENU on the remote control. The main menu will appear.
4Use the buttons P ;q or P =r to select the line 'MANUAL SEARCH' and confirm with OK .
Installing your video recording | 11 |
|