Philips VR670W/58 Confirm with OK To end, press Menu Insert a cassette, Switching off Record Link

Page 32

SPECIAL SETTINGS
OSD	è ON	p
CLOCK DISPLAY	OFF
RECORD LINK	OFF
REPEAT PLAY	OFF

________________________________

EXITpMENU STOREpOK

Automatic controlled recording from a satellite receiver (RECORD LINK)

This function automatically starts recording on the switched-off video recorder when a video signal is recognised through the connected scart cable. If your satellite receiver has a programming function, the recording will start automatically (as long as the satellite receiver is switched on).

1Switch on the TV set. If required, select the programme number for the video recorder.

2Press MENU on the remote control. The main menu will appear.

3Select line 'SPECIAL SETTINGS' using P =r or P ;q and confirm with OK .

4Select line 'RECORD LINK' using P =r or P ;q .

5Select function 'ON' with QSr or SqP .

Switching off 'Record Link'

To switch off the function, select 'OFF'.

6Confirm with OK .

7To end, press MENU .

8Insert a cassette.

9Use a scart cable to connect scart socket EXT.2 AV. 2 on the video recorder to the corresponding scart socket on the satellite receiver.

0Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time).

If necessary, please see the operating instructions for your satellite receiver.

ASwitch off the video recorder with STANDBY/ON m .

The video recorder is now ready to record. The beginning and end of the recording is controlled via scart socket EXT.2 AV. 2 .

When this function is switched on, ' x ' will appear on the video recorder display.

28	Manual recording

Image 32

Contents Table of contents Remote control Additional TV functions Front of the deviceSymbols on your video recorder display DECPage Dear Philips customer AIntroductionPhil Energy consumption 16W SpecificationsSupplied accessories Important notes regarding operation Special functions of your new video recorder BConnecting the video recorder Preparing the remote control for operationConnecting your video recorder to the TV set Connecting with a scart cableMy TV offers me a selection menu for the scart socket Connecting with a scart cableAV at Connecting without a scart cable AMy screen is emptyConnecting additional devices Socket EXT.2 AVAI do not see a test screen Programme number for video recorder operationCInstalling your video recording Initial installationConnecting additional devices What is an on menu?Decoder allocation Satellite receiverDecoder ASound disruptions can occur on several TV channelsHow can I switch off the decoder? Manual TV channel searchWhat is hidden behind the settings? What is a special channel?What is NICAM? AI dont know the channels for my TV stationsUsing the satellite receiver Automatic TV channel searchMonitor function Sorting and clearing TV channels manuallyAThe main menu will appear on the screen Setting on menu languageDeleting TV channels Setting the time and date ATime/date is displayed incorrectly despite manual settingDImportant notes for operation Navigation in the screen menuEPlayback Playing cassettesWhat does VHS mean? APicture/ sound quality is poorAutomatic switch of special functions Playing back Ntsc cassettesDisplaying current tape position How can I set the counter to 00000?Searching for a tape position with picture scanning Still picture / slow motionInstant View Automatic search for a tape position index searchAutomatic search for a blank space on the tape AThe cassette is ejectedFEliminating picture interference Optimising trackingOptimising still picture AI cannot reach optimal quality for the still pictureRecording without automatic switch Automatic switchGManual recording General informationRecording with automatic switch OTR One Preventing accidental erasing of cassettesLining up recordings assemble cut How can I clear the recording time just setted?Selecting the recording speed SP or LP Switching off Record Link Confirm with OK To end, press Menu Insert a cassetteHProgramming a recording Timer What is VPS/PDC?Programming a recording with ShowView What do I need to know about VPS/PDC?AThe following message appears on the screen Select Prog Switching on VPS/PDC in the Start input fieldSelecting onetime/daily/weekly recordings STANDBY/ON m Problems and solutions for programmedRecordings Programme numbers of the E1 and E2 scart socket Programming a recording without ShowViewEXT.1 AV E1 or EXT.2 AV E2 Problem solving for programmed recordings ProblemACLK will flash in the video recorder display Press Turbo TimerProgramming a recording with Will flash Press Clear CL Delete programmed recordingHow can I change back to Automatic Switch IOther functionsChanging the video colour system Video colour systemsWill flash in the video recorder display Switching the on display OSD off or onChild lock How can I switch on the clock display? Switch off the clock displayWhich settings can I choose? Automatic switch Continuous playbackWhat goes on behind the settings? Automatic switch to MonoSelecting the sound channel Playing back an audio dubbingWhat is a modulator? What is an modulator frequency?JSuppressing interference Optimising the modulatorSwitching the modulator on / off How can I switch the modulator back on?KBefore you call an engineer Hotline telephone numbersWith STANDBY/ON m BAttentionBefore you call an engineer