PROBLEM
Poor picture quality when you play a cassette:
No recording possible:
Programmed recording does not work:
The wrong TV channel was decoded (entered) after you programmed a recording using ShowView
There is picture or sound interference on TV reception:
SOLUTION
bYour TV set is not properly adjusted.
bThe cassette is badly worn or of poor quality: use new cassette.
bTracking is not properly adjusted: turn to chapter 'Eliminating picture interference' and read the section 'Optimising tracking'.
bPlease read chapter 'Eliminating picture interference'.
bYou haven't selected the correct video (colour) system for playback: Turn to chapter 'Additional functions' section 'Changing the video (colour) system'.
bThe TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored.
bA cassette was inserted that does not have the security tab (cannot be used to record): Insert a cassette with an intact security tab or change cassette. For more information, please see the section 'Preventing accidental erasing of cassettes' in chapter 'Manual Recording'.
b'VPS/PDC' switched on but 'VPS/PDCtime' wrong: 'enter 'VPS/PDCtime exactly to the minute. Have your aerial checked.
bYou have programmed the wrong time or date: check time and date.
bCheck time and date. If time and date are wrong despite manual setting, you can switch 'SMART CLOCK' off. Please read the section 'Setting the time and date' in the chapter 'Installing your video recorder'.
bYou have not set the TIMER properly: Check the programmed recordings (TIMER block).
bYou have put in a cassette that cannot be recorded on: undo the erase protection on the cassette.
b1. Enter the ShowView programming number of the desired TV channel.
2.Confirm with OK .
3.Check the programme number/channel name in the 'PROG.' input field
4.If this does not correspond to the desired TV channel, select the input field and change the programme number/channel name.
5.Confirm with TIMER k .
bTurn to chapter 'Suppressing interference' and read 'Optimising the modulator' and 'Switching on/off the modulator'.
bHave your aerial checked.
bYou will find information on how to switch the TV system in chapter 'Installing your video recorder' section 'Manual TV channel search'.
ENGLISH
Before you call an engineer | 45 |
|