Philips VR670B/58, VR670W/58 Problems and solutions for programmed, Recordings, STANDBY/ON m

Problems and solutions for programmed

recordings

PROBLEM

SOLUTION

The video recorder

bWhile a programmed recording is being made, you cannot operate your video recorder manually.

will not operate

If you want to cancel the programmed recording, press STANDBY/ON m .

'SWITCH TO

STANDBY- TIMER

bThe video recorder was switched on several minutes before the start of a programmed recording.

RECORDING' flashes on

Switch off the video recorder with STANDBY/ON m . A programmed recording (timer) will

only function if the video recorder is switched off.

the TV screen

Cassette is ejected

bThe end of the tape was reached during recording.

during recording

Error message: 'NO

CASSETTE' k ' will flash

b

in the video recorder

No cassette was inserted. Insert a cassette and switch off the video recorder using

STANDBY/ON m .

display

Cassette was ejected

bA cassette was inserted with the security tab removed. Undo the erase protection (chapter

as soon as the

'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different

OK button was pressed

cassette.

Error message: 'ALL

bIf this error message appears after pressing TIMER k , then all TIMER blocks

are already

TIMERS OCCUPIED'

programmed. No more recordings can be programmed. If you want

to clear a

programmed

recording (TIMER block), select it with P ;q or P =r and then press

CLEAR (CL) .

Programming a recording (TIMER)

31