UNPACKING AND REPACKING INSTRUCTIONS
The LF 6600 is shipped with foam packing material which protects the unit from shock and vibration. When you receive your LF 6600, inspect the shipping carton for damage before unpacking the unit to substantiate a claim with the carrier if the unit is damaged. Retain all original packing materials for possible reshipment.
WARNING
The LF 6600 must be unpacked, repacked and transported by two persons. Physical injury can result if one person attempts to lift the LF 6600. A wheeled cartis recommended for transporting the LF 6600 within a building. Precautions should be taken to guard against sudden bumps and jarring.
UNPACKING THE TOWER CONFIGURATION
The LF 6600 is packaged as illustrated in the next figure. The top, bottom and sides of the LF 6600 are protected from shock and vibration by foam cushions. The top cushions are also used to hold the accessories box (inner box) which is placed between the blocks of foam.
To unpack the unit:
1)Move the carton to the installation site. Unpacking the carton at the installation site minimizes the effects of vibration and shock.
2)Cut the tape and straps that secure the top of the box. Do not allow the cutting blade to penetrate into the carton.
3)Carefully lift the outer corrugated carton up and remove it while supporting the inner hinged wooden ramp. When the carton is removed, lower the ramp to the floor and remove the front foam cushion.
4)Remove the accessories box (inner carton) containing cables and documentation and the two foam cushions which support the box. Remove the ESD protective packing material.
97653976 F Page 23