Useful Features for Camera Recording
White Balance Lock
Operation Button
MENU Button
1 Press the MENU button until 
appears on the monitor (Camera mode).
Press 
on the operation button (
) to select “MANUAL”.
2 Select “CAMERA MODE” and then press B on the 
button to select “MANUAL”.
|
| ITEM |
| CAMERA MODE | AUTO MANUAL |
| SCENE MENU |
|
S | SHUT. SPEED | S |
| ||
E | WHITE BALANCE | E |
T | IRIS | T |
To Return to the Auto Mode
In step 5, press C on the operation button (
) to select “AUTO”. The white balance mode display will change to “AUTO”.
To reset the camcorder to Full Auto mode, press 
on the 
button to select “CAMERA MODE”
and then press C on the 
button to select “AUTO” in step 2.
Notes:
•When recording with the white balance locked, if the light source changes or if you move from indoor to outdoor, or vice versa, the white balance may shift. Reset the white balance.
•Even after the white balance has been locked, white balance shifts may occur due to slight changes in illumination or depending on the subject.
•Do not move the camcorder while “LOCK” is flashing in step 5.
•If the “LOCK” indicator does not stop flashing, set the white balance to “AUTO” and reset to “LOCK”.
•If the Scene Menu is set after setting the white balance to “LOCK”, the white balance will automatically return to “AUTO”.
3 PressAon the 
button to select “WHITE BALANCE”.
|
|
| ITEM | |||
|
|
|
|
|
|
|
|
| CAMERA MODE |
|
|
|
|
|
|
|
|
|
|
|
|
| SCENE MENU |
|
|
|
|
|
|
|
|
|
| |
S |
| SHUT. SPEED |
|
|
| S |
|
|
|
|
| ||
E | WHITE BALANCE |
| AUTO | LOCK | E | |
T |
|
|
|
|
| T |
| IRIS |
|
|
| ||
4 Aim the camcorder at a solid white subject in the light.
5 Press B on the 
button to select “LOCK”.
The “LOCK” display flashes and the white balance is automatically locked. The “LOCK” display stops flashing when the locking procedure is completed.
|
| ITEM |
|
|
| CAMERA MODE |
|
|
|
| SCENE MENU |
|
|
|
S | SHUT. SPEED | AUTO LOCK | S |
|
E | WHITE BALANCE | E |
| |
T | IRIS |
| T | 46 |
|
|
|
|