
Manual Iris
The camcorder is normally set to Auto Iris mode, which automatically chooses the optimal aperture. When there is too much contrast in brightness between the subject and background, you may not be able to record a clear image. Correct the iris to adjust the aperture.
Operation Button
MENU Button
1 Press the MENU button until appears on the monitor (Camera mode).
Press on the operation button (
) to select “MANUAL”.
4 Press C or B on the operation button ( ) to select the desired value setting.
•The number shows the selected aperture value. The adjustable range is from −6 (least light) to ‘6 (most light).
|
| ITEM |
|
| CAMERA MODE |
|
|
| SCENE MENU |
|
|
S | SHUT. SPEED |
| S |
E | WHITE BALANCE |
| E |
T | IRIS | T | |
| PREV. PAGE |
|
|
|
| ITEM |
|
To Return to the Auto Mode
In step 4, press C or B on the operation button (
) to select “0”.
To reset the camcorder to Full Auto mode, press on the
button to select “CAMERA MODE”
and then press C on the button to select “AUTO” in step 2.
Note:
•If the Scene Menu is set after setting the manual iris, the aperture setting will automatically return to “0” (normal).
Camera Recording | Useful Features for |
2 Select “CAMERA MODE” and then press B on the button to select “MANUAL”.
|
| ITEM |
| CAMERA MODE | AUTO MANUAL |
| SCENE MENU |
|
S | SHUT. SPEED | S |
E | WHITE BALANCE | E |
T | IRIS | T |
|
|
3 PressAon the
button to select “IRIS”.
|
| ITEM |
|
| CAMERA MODE |
|
|
| SCENE MENU |
|
|
S | SHUT. SPEED |
| S |
E | WHITE BALANCE |
| E |
T | IRIS | 0 | T |
| PREV. PAGE |
|
|
|
| ITEM |
|
47