RCA ProV950HB Use and Care, Precautions, Avoid shocks Dropping, Proximity to lighting equipment

Page 66

Use and Care

Precautions

After operation, remove the battery pack from the unit.

Do not aim the lens at the sun.

Do not allow direct sunlight to strike the camcorder lens or LCD panel, whether recording is in progress or not, as it may damage the CCD sensor or LCD panel surface. Be particularly careful when recording outside.

When shooting in dark places, avoid sudden brightly lit objects or light sources, such as the sun. Otherwise, the image may white out. Should this happen, point the camera in a different direction until the picture returns to normal.

Avoid magnetic sources. Using the camcorder near strong fluorescent

lights, motors, televisions, or other magnetic

sources may adversely affect recorded images.

Remember to remove the cassette tape, turn off the power, and remove the battery pack when the camcorder is not in use.

Using the camcorder near a broadcasting station or other powerful transmission source may cause buzzing or picture deterioration.

Avoid shocks and

dropping.

Do not drop or otherwise subject the camcorder to

hard shocks or strong vibrations. Bumping or

striking the unit during

recording will generate noise in the recorded image.

Avoid placing the camcorder in close

proximity to lighting equipment.

The heat from incandescent lights may deform the camcorder, or cause it to malfunction.

Always respect prohibitions or restrictions on the use of electronic equipment on commercial flights or in other sensitive areas. The camcorder generates electrical interference that can disable vital equipment, leading to the risk of a serious accident.

Watch the temperature and humidity. You can use your camcorder at 0° C to 40° C (32° F to 104°F), and at 30% to 80% relative humidity. Do not store the unit in an unventilated car in the summer, in direct sunlight, or near strong heat sources; this can result in severe damage

to the unit’s casing and circuitry. Be careful when handling the unit after it has been left in a hot place, such as the ones described above.

Avoid situations where water, sand, dust or other foreign matter could get on or inside the camcorder. Such substances could cause malfunctions.

Do not use your camcorder in areas with ex- cessive smoke or steam.

Do not leave your

camcorder in areas with excessive dust or moisture. Such environments can

cause mildew to form on this unit’s lenses. Be sure to provide ample ventilation.

Some small, portable tripods may be difficult to attach and may not be sturdy enough to support your camcorder. Be sure to use only a strong, stable tripod.

When using your camcorder in a cold environment, the color LCD view screen may appear less bright. This often occurs in cold environments immediately after the power is turned on. This is not a malfunction. If this occurs, put the camcorder in a warmer location for some time before use. To prevent excessive cooling, wrap the camcorder in a thick cloth (a blanket, etc.).

62

Image 66
Contents Users Guide Product Registration Model No ProV950HB Serial No Purchase Date Purchased FromInstallation On nextService UseExample of Antenna Grounding Table of Contents Table of Contents Supplied Accessories Supplied AccessoriesRemoving the Lens Protector When the cassette compartment door is openedCamcorder Controls Cassette CompartmentSystem Connector When Camera Module is RotatedPower Switch CAMERA/VCR About the Plug in Power MIC JackFirst-Time Operation Installing the Lithium Cell in the CamcorderInstalling the Lithium Cell in the Remote Control Cassette Compartment Door ReleaseAttaching the AC Adapter to the Docking Station Attaching the AC Adapter/ Battery ChargerCharging the Battery Pack Removing the AC Adapter from the Docking StationFirst-Time Operation Charging Two Battery Packs at the Same TimeCharging on the Docking Station Removing the Camcorder from the Docking StationRemoving the Battery Pack Inserting and Removing the Battery PackInserting the Battery Pack Battery Pack HandlingFrom an AC Outlet Powering the CamcorderUsing an Optional Plug Adapter Removing the DC Cable from CamcorderTo Cigarette Powering the Camcorder from Your Car BatteryDC Cable Jack Lighter SocketRemoving a Cassette Inserting and Removing a CassetteInserting a Cassette Perform and then remove the cassetteControlling the Monitor Display Camera mode when the Power switch Is set to CameraVCR mode when the Power switch Is set to VCR About the Operation buttonPress C or B on the button to set the desired mode Using the On-Screen MenuButton and slide the Power switch to Camera To display the VCR mode menu screenCamera Mode VCR ModeReturning to the Previous Screen Indicates a blinking display Press B on Setting the Area, Date and TimeTo Turn Off the Menu Display Press the Menu buttonChanging the Area of the Time Zone Blank Area SettingWorld Clock To Turn Off the MENU-PAGE DisplaySetting Daylight Saving Time Time Zone ChartTo Display Area, Date and Time on the Monitor Area Table Area Number Area Name Countries or AreasPress C on the operation button to select Picture Picture/Backlight AdjustmentsWhen the Camcorder is in VCR Mode Operation Button Menu ButtonHandling the LCD Monitor Using the Hand StrapAttaching the Shoulder Strap Fitting the Strap to Your HandTo Pause Recording Battery Pack Max. Camera RecordingEasy Camera Recording with Full Auto Maximum Time for Continuous Camera RecordingSetting the Digital Zoom ZoomingCamera Recording Digital Quick Zoom Extend Zoom Setting Digital Quick Zoom RangesUsing Digital Quick Zoom Extend Zoom Auto FocusBacklight Compensation BLC Gain-up Cat’s EyeDisplay changes to the Light display Tripod Power Zoom Buttons Digital Image Stabilization DISMacro Shots Fade Out Fade In and Fade OutFade PressAon the operation button to select FadeScreen in Camera Mode Setting the Wide Screen ModeTo Cancel Automatic Display Mode, the screen with the indicators such asQuick Return Edit SearchTips on Recording Positions Hints for Better ShootingBasic Recording Positions Setting the Camcorder to Full Auto Mode Recording the Date and TimeApprox. Remaining Monitor Display Recording Time Remaining Battery Power DisplayRemaining Recording Time Display Min.-0 minFast Forward and Rewind Volume ControlPlayback Auto Tape RewindVideo Search Using the StandStill SlowPress the Menu button until screen appears on the monitor Program SearchBasic Operations Playback Oldest RecordingTo Turn Off the Counter Display Using the Tape CounterTo Reset the Counter to Zero Press a on the button again to select Counter in stepTo Cancel the Counter Memory Mode Counter MemoryTurning Off the LCD Monitor Backlight Using the Infrared Remote Control Example of Recording in Self Recording Mode Self RecordingNormal Self Recording Recording time is preset for 20 seconds Camera Recording Useful Features forSelf Recording Message OSD Useful Features for Camera Recording Photoreceptor Usable Buttons During Self Recording ModeMore Information on Self Recording Manual Focus Setting the Manual FocusTo Return to Auto Focus Mode Press C or B on the button to select NEARor FARTo Go Back to Auto Mode Scene Menu Program AEOFF Recommended Shutter Speeds Setting the Shutter SpeedTo Return to the Standard Shutter Speed Situation RecommendedTo Return to the Auto Mode White Balance Lock, press C or B on the operation button to select Camera Recording Useful Features forManual Iris PressAon the button to select IrisRecording a Five-Second Still Image Snapshot Still RecordingTo Stop Snapshot or Still Recording Strobe Recording Using the Stopwatch FunctionTo Reset the Stopwatch StopwatchDisplaying Lap Times Lighting indicator Light LightingReference About the S-video Connector Connection to TV Using the Docking StationConnection to TV Using a VCR Connections and EditingConnections for Playback on a TV Using Audio/Video Jacks Use the Camcorder to Play Back Tapes on a TVConnections and Editing Detaching the A/V Pack Using the Optional SAV103 A/V PackConnections and Editing Attaching the A/V PackCutting Unwanted Sequences Setting the Edit ModeEditing To Stop EditingTo Stop Recording Recording from an External SourceTo Record from an External Source RecordingFluorescent Lamp Backlight Replacing the Fluorescent Lamp BacklightReferences Optional Accessories Total Amount Enclosed Accessory Order FormPlease complete other side also ReferencesAccessory Order Form To order accessories, contact your local Dealer United States and Canada OrdersAvoid shocks Dropping PrecautionsUse and Care Proximity to lighting equipmentHow to prevent trouble due to dew formation What is dew formation?When dew forms in your camcorder Dew warning featureTemperature during charging Battery PackBattery pack consumption For long battery lifetimeVideo Cassette Tapes Trouble Checks Symptom Possible cause Suggested solution Specifications Signal System Ntsc standardAC Adapter/Battery Charger Customer Assistance and Service Returning equipment to Thomson for repair or exchangeLimited warranty Product Registration What your warranty does not coverHow State Law relates to warranty If you purchased your camcorder outside the USAIndex Light Indicator Eject the Cassette IndicatorFast Forward Operation Features Camera Recording Handstrap, Adjusting Hi8 Cassettes Important SafeguardsIndex Warranty, Limited Tape END IndicatorTape Ends Soon Indicator Using RemoteMeridian Street Indianapolis, Part Number 96-ProV950HB-1Lxxvi