RCA Pro884HB manual Titler, Creating a Title

Titler

The titler can store a title page in memory that can be displayed and recorded at any time. The built-in character register contains 47 characters for creating titles on two lines with up to 16 characters per line.

CAM/OFF/VCR Switch

				T
				W
		FADE	EIS
		FOCUS	16X9	OPEN
	F
		N
		DATE/TITLE		DCIN
				6V
		PLAY
	REW		DISPLAY
		EDIT
		SEARCH	F.F.
PLAY Button		STOP

REW	F.FWD F.FWD
REW Button		Button
STOP	PLAY
STOP Button		PLAY Button
A/V DUB	PAUSE
DISPLAY RECORD		PAUSE/
		RECORD
	T
		Button
RESET	ZOOM

REW Button

Thumb Trigger

	W
TITLE	S.EDIT

DATE/TITLE Button

STOP F.F Button

Button

TITLE ON

OFF

ON/OFF

Button

Creating a Title

1.Attach a power source and slide the CAM/OFF/VCR switch to CAM or VCR.

2.Press TITLE ON/OFF on the remote to display the title graphics.

Note: If the CAM/OFF/VCR switch is in CAM, pressing DATE/TITLE on the camcorder will also display the title page.

6.Repeat steps 4 and 5 until you have completed the title.

Note: To correct a character, press STOP to place the cursor over it and then press F.F (F.FWD on remote) or REW to enter the correct character.

If you want to delete a character, press

F.F(F.FWD on remote) or REW until the blank space appears.

3.Press STOP to move the flashing cursor to the place you want to begin.

4.Select the first character by pressing F.F (F.FWD on remote) or REW until the character you want appears. See the “Chart of Characters” on the next page for the characters available in the titler’s register.

5.After you have selected the first character, press STOP to move the flashing cursor to next position.

7.Press TITLE ON/OFF on remote to store the title and remove the title display from the viewfinder when you are finished.

Important Note: Remember to remove the title graphics from the viewfinder for normal recording.

42