Synchro Edit
Synchro edit allows your camcorder to control a VCR (one that has a compatible PAUSE, EDIT, EDIT IN/OUT, or SYNC jack) while tapes are being copied from the camcorder to the VCR. This is convenient when you want to copy only selected segments from a previously recorded tape. An optional AVS80 synchro edit cable shown on page 63 is required.
Note: Not all RCA VCRs have compatible synchro edit jacks.
CAM/OFF/VCR Switch
PLAY Button | FADE | EIS | |
REW Button | F | FOCUS | 16X9 |
|
| N |
|
F.F Button |
| DATE/TITLE | |
| PLAY |
| |
| REW |
| DISPLAY |
| EDIT |
| |
STOP Button |
| F.F. | |
| SEARCH | ||
| STOP |
| |
|
|
|
Audio/Video In/Out Connector (Located behind small cover)
Optional AVS80 Synchro Edit
Output Cable
T
W | INST. |
ZOOM |
OPEN
DCIN 6V
Thumb
Trigger
Compatibility Switch
| AUDIO | VIDEO |
|
R | IN L | IN | EDIT |
Note: If your VCR has a single (mono) AUDIO IN jack, connect either the left or right audio plug.
Back of VCR
Caution: The unauthorized recording of copyrighted material may infringe the rights of others. Such recordings should not be made.
46