Playback
|
| STOP |
| R | RETAKE | F |
|
| |
LIGHT | AUTO ON | COUNTER | R/M |
| IPE |
| CHARGE | POWER REFRESH | EJECT |
| OFF |
|
| DIGIFECT |
|
| |||
|
| FADE/W |
|
|
| ||||
|
| P . | AE |
|
| ||||
|
|
|
|
|
|
|
|
| |
COUNTER R/M Playback buttons button
Using Counter Memory
Counter Memory makes it easier to locate a specific tape segment.
1.Press and hold the COUNTER R/M button for more than 1 second. (The counter resets to 0:00:00.)
2.Press COUNTER R/M for less than 1 second. (M appears.)
3.After recording or playback, press 
, then 
. (The tape automatically stops at or near 0:00:00.)
4.Press 
/
to start playback.
•The counter memory functions both in the Fast- Forward and Rewind modes.
•To disable the Counter Memory Function, press COUNTER R/M for less than 1 second until M disappears.
Still Playback Mode
Still playback pauses the tape, freezing a single frame.
1.Press the Play/Pause button (
/
) during playback to freeze the image.
2.To resume normal playback, press the Play/ Pause button again.
•Video “noise” appears on the screen and the picture may become monochrome during still playback. This is normal.
•If pause continues for more than a few minutes, the camcorder may turn off.
•After approximately 5 minutes in stop mode, the power turns off automatically.
Chapter 4 | 47 |