RCA CC6364/CC6374 manual Removing the Tape from the Cassette Tape Adapter

Playback

Removing the Tape from the Cassette

Tape Adapter

1. Slide the adapter’s EJECT switch to the right. The load detector extends from the side and the whirring sound indicates the tape is being released before the adapter’s tape compartment lid opens.

2. Use the access hole on the bottom of the

EJECT switch	adapter to push the tape up and remove it from
	the adapter.
	3. Gently close the adapter’s tape compartment lid.
	Caution: If the load detector is still extending
	from the side of the cassette tape adapter after
	you’ve attempted to load the tape, loading is not
	complete. Try to load the tape again. Attempting
	to insert the cassette tape adapter into a VCR with
	the load detector extended may cause damage to
	the adapter and/or VCR.
	Caution: Do not touch the reels during loading
	and unloading. It could cause injury or damage
	the cassette tape adapter or tape.

Notes:

•During special-effect playback (still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

•To record on a VCR using a compact tape and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Chapter 4 51