Recording
Attaching the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from your shoulder and – when you are ready to shoot – bring the camcorder to shooting position in one quick movement.
To Attach the Shoulder Strap
1. If the strap keeper is |
|
over a double section |
|
of the strap, slide the |
|
strap keeper off the |
|
end of the strap. |
|
Replace the keeper |
|
on the strap between | Keeper |
the buckle and the |
|
end of the strap as |
|
shown. |
|
2.Loop the end of the strap over the top of the shoulder strap attachment ring.
Buckle Keeper
Attachment
Rings
3.Thread the end of the strap back through the keeper and buckle. Make sure the strap is not twisted.
4.Attach the other end of the strap to the other shoulder strap attachment ring.
5.Adjust the shoulder strap to the desired length.
6.Slide both keepers up snugly against the shoulder strap attachment rings to prevent the strap from slipping.
Cautions: When carrying the camcorder with the shoulder strap, you may find it convenient to rotate the viewfinder down and slide it to the front. This helps prevent possible damage to the viewfinder from bumping against your body as you move.
Make sure the shoulder strap is firmly attached before using it to carry the camcorder.
56