Radio Shack 3Com Bigpicture operating instructions Installing the Video Capture Card’s Drivers

INSTALLATION

consult your device’s manual if this configuration does not apply. The power jack on the capture card is of no concern when you are using a device other than the NTSC camera included in your Bigpicture kit.

To connect your device’s audio out to your sound card, connect a phono plug to miniature 1/8-inch (3.5 mm) phone plug adapter (Radio Shack catalog number 274-330a) to one end of an RCA male to RCA male cable. Plug the RCA male end of the cable into your device’s AUDIO OUT jack. Plug the 1/8-inch plug into the sound card’s 1/8-inch MIC or AUDIO IN jack (refer to the sound card’s documentation for further information).

Installing the Video Capture

Card’s Drivers

NOTE: If you wrote “950B” in the blank on page 4, go to “Video Capture Card Driver Installation with Windows 95 Version 950B” on page 15.

Video Capture Card Driver Installation with Windows 95 Versions 950 and 950A

1.Turn on your computer. When Windows restarts, it will detect the video capture card. You should see the following screen.

10