Sanyo VCC-6570P instruction manual Connections to the camera Y/C OUT connector

CONNECTIONS

(A)1

A

2

3

Connections to the camera Y/C OUT connector

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Using a coaxial cable (twin type, 75 ohms), connect the Y/C OUT connector from the camera to the S-VIDEO input terminal on the monitor or time lapse VCR.

2When using this unit, the supplied clamping core A and B must be installed on the power cord and BNC cable, in order to prevent electromagnetic interference to the other devices connected.

3Insert the plug of this power cord into a wall outlet. Then, turn on the power of all the devices connected to the camera.

The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

2

B

(Video signal connections)

: VIDEO IN : VIDEO OUT

CAUTION:

•Please use a monitor with a Y/C or S-VIDEO input terminal, or a time lapse VCR with a S-VIDEO input terminal.

•Use a Mini-DIN (round type, 4-pin) plug to connect to the Y/C connector.

Never use a coaxial cable longer that 10 metres to connect the camera to the S-VIDEO input terminal.

10 English