Sanyo VCC-6570P instruction manual Precautions

Page 3

PRECAUTIONS

In case of problem

Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside the camera. If used with a foreign object inside, it could cause a fire, short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Be careful to protect the camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera or subject it to strong shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor, transformer, audio speakers the magnetic field they generate will distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not install it where there is greasy smoke or steam, where the dampness may get too high, or where there is a lot of dust.

Protect from high temperatures

Do not install close to stoves, or other heat generating devices, such as spotlights, etc., or where it could be subject to direct sunlight, as that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler room, as the temperature may raise to high levels.

Install where the temperature range will stay between –10˚C and 50˚C.

(no condensation)

Cleaning

Dirt can be removed from the cabinet by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a soft detergent solution and wrung dry, then wipe dry with dry soft cloth.

Do not use benzine, thinner or other chemical product on the cabinet, as that may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time, as that may cause damage or paint peeling.

ENGLISH

2 English

Image 3
Contents Über diese Bedienungsanleitung About this manualContents AccessoriesFeatures Precautions C OUT connector 4 pin Power indicator PowerVideo output connector Video OUT BNC type Line phase adjustment volume Line PhaseParts Names Hole 1/4-20 UNCLens mount cap Camera setup section under the cover Lens iris output connector LensVideo type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses DC type auto-iris lensMount type lens Mounting the LensCheck the lens mount Remove the lens mount cap from the cameraRewiring the lens cable in the lens iris plug Flange-back adjustmentMounting the Lens Coaxial cable type and maximum length ConnectionsConnections Connections to the camera Y/C OUT connectorSettings Table a switch 1 ~ 120 250 500 1000 2000 4000 10000 SettingsHigh speed electronic shutter setting Iris function settingThis camera has two different backlight Backlight compensation settingWhite balance adjustment Synchronization settingsLine phase adjustment Lens iris adjustment External sync adjustment VBSTroubleshooting No picture on the monitor screenPicture is not clear Camera SpecificationsDimensions Specifications1AC6P1P2453 L53T5/XE 0801KPS-DSP