Sanyo VCC-6570P Lens iris output connector Lens, Camera setup section under the cover

PARTS NAMES

H

GLens iris output connector (LENS)

This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.

H Camera setup section (under the cover)

G	These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However,
	if due to installation conditions or environment the settings may need to be modified for best results (see
	"SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover.

NOTE: When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the A.I. LENS switch to the VIDEO position.

English 5