Sanyo VCC-6570P instruction manual Mounting the Lens, Check the lens mount, Mount type lens

MOUNTING THE LENS

1

C mount type lens 2

3

2

CS mount type lens

Please use a DC type auto-iris lens (sold separately).

Check the lens mount

Do not use a lens if the length “L” is more than 5 mm. That may damage the camera and prevent proper installation.

L

1Remove the lens mount cap from the camera.

2Install the auto-iris lens. CS mount type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mount type lens

To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully align the lens mount with the camera opening and turn the lens slowly to install it.

3Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.

When using lenses from other makers, the plug shape may not correspond to the terminal on the camera. In such a case, remove the original plug and using a soldering iron, connect the supplied lens iris plug according to the diagram. (Refer to page 8.)

NOTE: When using an auto-iris lens, the supplied clamping core C must be installed on the lens wire, in order to prevent electromagnetic interference to the other devices connected.

English 7