Acclaim Lighting ACCLAIM USB ONLY INTRAORAL DIGITAL VIDEO CAMERA SYSTEM USB Interface Connection

Page 11

SYSTEM SETUP

USB Interface Connection - Connect the USB Type A connector side of the USB Umbilical to any available USB 2.0 High Speed port on the user supplied Computer System. Always make sure to use the same USB port whenever recon- nection of the USB cable is necessary.

Computer

USB Port

USB Type A

Connector

USB

Umbilical

USB Interface Connection

Use care when adhering the handpiece holder to selected surface. The double-sided adhesive fastens quickly and permanently.

Camera Handpiece Holder Installation - Using the supplied double- sided adhesive fastener, the Camera Handpiece Holder, part number A5145, can be fastened to any convenient location for safe storage of the USB Umbilical or Camera Handpiece when not in use.

Install the Camera Handpiece Holder as follows:

1.Remove the protective film from the double-sided adhesive on the Handpiece Holder

2.Attach the Camera Handpiece Holder to a flat, clean dry surface where the Acclaim Camera Handpiece or USB Umbilical can be located for convenient storage.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USB Only Intraoral Digital Video Camera System Foreword Table of ContentsCongratulations WarrantyON-LINE Warranty Registration Markings Safety NoticeIncorrect Usage Use of Accessory EquipmentImportant Information General NotesA5550 USB Umbilical box includes Qty KEY Parts IdentificationUnpacking and Inspection Component DescriptionSystem Properties PRE-INSTALLATION InformationAcclaim Camera Handpiece A5520 Handpiece Keypad Button FunctionsSystem Setup USB Interface Connection Infection Control Sheath System Operation Camera Portability Final System Check Inspection and Cleaning MaintenanceNtsc SpecificationsDimensions Length Width Height Weight Physical CharacteristicsAccessories Visix Imaging Software Key FeaturesStsj
Top Page Image Contents