MAINTENANCE
INSPECTION AND CLEANING
Perform the following inspection and cleaning procedures periodically as a preventive maintenance measure to keep the Acclaim System in optimal condition resulting in
Do not attempt any internal service of Acclaim System components. Contact your local authorized air techniques dealer for service. Failure to heed this warning may result in equipment damage and voiding the warranty.
Inspection - Routinely inspect each component of the Acclaim System for pos- sible defects as follows:
1.Camera Handpiece -
a.Check overall handpiece for chips, cracks or other irregularities.
b.Check the lens window for debris or spots.
c.Check the connector socket for damage.
2.Cables and Connectors -
a.Check cables for damaged or deteriorated insulation kinking or twisting.
b.Check connectors for loose, bent or missing pins.
c.Check that the
Do not spray cleaning liquids or disinfectants directly on the camera hand- piece. Use care not to allow liquids to run into internal circuitry.
Do not wipe the surfaces using benzine, thinner, etc. as this may degrade the finish.
Do not autoclave the Camera Handpiece.
CAUTION: Unplug the Acclaim System components before performing cleaning.
2patient and disposed of properly in accordance with local code.The infection control sheath must be used for only one
Cleaning - Clean each component of the Acclaim System as necessary by performing the following procedures.
1.Camera Handpiece - Following every patient use, remove the infection control sheath from the Camera Handpiece and dispose in accordance with local regulations. The Camera Handpiece can be wiped clean and disinfected with any
2.Camera Window Lens - Remove debris or spots from lens window by cleaning with alcohol and cotton swabs.
16