Camera Portability

Do not twist or turn the Handpiece Cable connector. The connector is keyed and mates straight on with Camera Handpiece connector.

Whether detaching just the Camera Handpiece from the USB Umbilical and using with additional Acclaim USB Umbilicals installed on other computers or bringing the complete system (handpiece and umbilical), the Acclaim System is easily shared among patient operatories.

Refer to the corresponding illustrations and perform the following when trans- porting only the Camera Handpiece.

1.Retract collar of quick disconnect connector and simultaneously pull straight from the Handpiece connector.

2.Release connector quick disconnect collar.

3.Store the USB Umbilical by placing cable slide holder into the Handpiece Holder.

4.Transport Handpiece to next operatory.

5.Connect Handpiece at new location by aligning the connector key with the keyway of the mating USB Umbilical connector.

6.Insert straight into Handpiece connector until it securely snaps into place.

When transporting the complete Acclaim System (handpiece and umbilical) among patient operatories, simply disconnect the the USB connector end of the USB Umbilical, transport the system and reconnect to the new computer. Make sure that the computer in the new operatory is using compliant software.

Quick Disconnect	Camera
Collar	Handpiece

Detaching Camera Handpiece

Connector Key

Camera Handpiece

Connecting Camera Handpiece

Quick Disconnect

Connector End

Handpiece Holder

Cable Slide Holder

Control Umbilical

Stored USB Umbilical