Handpiece Keypad Button Functions

Acclaim Camera

Handpiece

A5520

Keypad Buttons - Each keypad button provides the Acclaim Camera Handpiece fingertip control over the PC streaming video capture software via the USB Umbilical. The specific functions performed by the keypad buttons depend on a software installation that supports the 2-button handpiece. Typical keypad actions provided below.

NOTE: Simultaneously depressing both keypad buttons for approximately 3 seconds deactivates the Camera Handpiece LED light source. This is commonly used when imaging an X-ray on a light box.

(1)	Top Keypad Button	Sends a Button 1 command to the PC.
		While the specific function performed
		depends on the setting of the video capture
		software application installed on the PC,
		this command typically freezes and
		unfreezes the image that is displayed on the
		computer monitor. (Press to go live. Release
		to freeze.)
(2)	Bottom Keypad Button	Sends a Button 2 command to the PC.
		While the specific action depends on the
		video capture software installed, it typically
		saves the image displayed on the computer
		monitor to the computer hard disk.
(3)	Handpiece Connector	An 8-pin connector socket that accepts
		connection of the keyed 8-pin quick
		disconnect plug end of the USB
		Umbilical.