Acclaim Lighting ISO 9001, ISO13405 manual Safety Notice, Markings

Page 4

SAFETY NOTICE

GENERAL

This equipment has been designed to minimize exposure of personnel to hazards. While the Acclaim System is designed for safe operation, certain precautions must be observed. Use of the Acclaim System not in conformance with the instructions specified in this manual may result in permanent failure of the unit.

KNOWLEDGE OF WARNINGS AND CAUTIONS

Users must exercise every precaution to ensure personnel safety, and be familiar with the warnings and cautions presented throughout this manual and summa- rized below.

CAUTION: There are no user-serviceable parts inside. Servicing should be performed by qualified dealer service representatives only.

Connecting any device to the Acclaim System that does not meet the equiv- alent safety requirements of the system may reduce the safety effectiveness of the Acclaim System.

Unplug the system components from power before performing cleaning procedures.

WARNING: To prevent fire or electrical shock, do not expose this equipment to rain or moisture.

Do not spray cleaning liquids or disinfectants directly on the camera hand- piece or the USB Umbilical. Use care not to allow liquids to run into inter- nal circuitry.

Do not wipe the surfaces using benzine, thinner, etc. as this may degrade the finish.

DO NOT ATTEMPT INTERNAL SERVICE

The interior of each component of the Acclaim System is only accessible by removing hardware with tools and should only be opened and serviced by an authorized service technician. Please contact your local authorized dealer for service. Failure to heed this warning may result in equipment damage and void- ing the warranty.

Markings.

The following terms or symbols are used on the equipment or in this manual to denote information of special importance:

Alerts users to important Operating and Maintenance instructions. Read carefully to avoid any problems.

Indicates type B equipment in accordance with IEC 60601-1

2

Alerts users that the infection

control sheath must be

used for only one patient and

disposed of properly in

accordance with local code.

ATTENTION USERS:

Manufacturing date code on serial number label is in the format:MONTH YYYY.

4

Image 4
Contents USB Only Intraoral Digital Video Camera System Table of Contents ForewordON-LINE Warranty Registration WarrantyCongratulations Safety Notice MarkingsUse of Accessory Equipment Important InformationGeneral Notes Incorrect UsageKEY Parts Identification A5550 USB Umbilical box includes QtyComponent Description Unpacking and InspectionPRE-INSTALLATION Information System PropertiesHandpiece Keypad Button Functions Acclaim Camera Handpiece A5520System Setup USB Interface Connection Infection Control Sheath System Operation Camera Portability Final System Check Maintenance Inspection and CleaningSpecifications NtscAccessories Physical CharacteristicsDimensions Length Width Height Weight Key Features Visix Imaging SoftwareStsj