TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
Video Audio
Video and Audio
Video Profile 1-4
Encode Type: Select one of H264, JPEG, or MPEG4 encoding from the
Resolution: Select the size of the desired screen viewing resolution.
FPS: Select the FPS (Frames per Second). 30 is the maximum (best quality).
bps: To control the amount of bandwidth that the camera uses select the BPS (Bits per Second). to fix the bandwidth rate. A higher bps provides a
better image quality but requires more network bandwidth to transmit the image.
JPEG quality: If the encoding type selected above is JPEG, then in this menu the quality of the JPEG video can be selected.
RTSP URL: Use this setting to configure a suffix that is added to your cameras RTSP address. For example for a camera with IP set to 192.168.10.30 and RTSP set to 3gpp the entire URL to access this video profile from the camera is: rtsp://192.168.10.30/3gpp
Notes
The following Video Profiles are used for special purposes:
Video Profile 3 for viewing the camera in
MJPEG.
Video Profile 4 is for viewing the camera over mobile devices. This profile is always set to use
To obtain a better quality of video the frame size, frame rate and bit rates must be increased however this results in hight bandwidth utilization. For a mobile phone it is suggested to use 5 fps and a bit rate of 20 kbps to obtain and excellent balance of picture quality versus bandwidth utilization.
41