TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
Patrol Selection: This box shows the available Preset Locations saved which can be moved to the Selected Locations box below by highlighting them and clicking on the Select button.
Selected Locations: The preset locations in this box: determine the locations the camera will view when the Patrol button is pressed in the Live View window.
Pan/Patrol Speed: Set the speed from 1 to 5 with 5 being the fastest. This controls the speed of the camera movements when either the Pan or Patrol button is pressed in the Live View page.
Dwelling Time: The setting here determines how long the camera spends at the preset position. Enter from 1 to XXXX seconds.
Click the Save button to save and activate your settings.
Digital Output
The camera’s Digital I/O terminal block is the physical connection or interface for connecting external devices suchs as InfraRed Sensors, Alarm Relays, and Srents to the
External Digital Input/Output Connectors
Digital I/O Terminal Block Description
The
Using the I/O terminal block allows you to connect multiple external alarm devices that can then be used to trigger image recording or snapshots that can be stored or emailed to a remote location. Below is the diagram of the terminal block with the connector pin descriptions.
Input Output (I/O) Connector
4 3 2 1
PINDescription
1DI + INPUT (Maximum 50mA & 12VDC)
2 DI - INPUT (DI is initially set to low state)
3 SW_COMMON OUTPUT (Initial state is SW_OPEN) (SW_OPEN is closed when DO is HIGH)
4 SW_NOPEN OUTPUT (Maximum 1A & 24VDC or 0.5A &125VAC)
49