Chapter 2: Server Installation
Installing the Chassis into a Telco Rack
1.Confirm that chassis includes the four mounting screws required to mount the chassis into a rack
2.Align the thru holes of the chassis with the thru holes of the rack.
3.Insert the mounting screws into the thru holes in the front of the chassis and through the thru holes in the rack
Warning! To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.
•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.
Figure 2-2. Installing the Chassis into a Telco Rack
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over.