Siemens CCMX1315-LP Copyright, Trademarks, Contacting us, Training courses, About this document

Page 2

Liefermöglichkeiten und technische Änderungen vorbehalten.

Data and design subject to change without notice. / Supply subject to availability. © 2009 Copyright by

Siemens Building Technologies

Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist.

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

Copyright

Copyright 2009 © Fire & Security Products GmbH & Co. oHG. All rights reserved.

Siemens Fire & Security Products GmbH & Co. oHG confers upon the purchaser the right to use the software.

It is not permitted to reproduce this document in whole or in part or translate it into another language without our written consent.

Trademarks

CCMx1315-LP is a trademark of Fire & Security Products GmbH & Co. oHG.

Microsoft is a registered trademark and Windows a trademark of Microsoft Corporation. All other products or company names referred to explicitly in this manual are mentioned only for purposes of identification or description and may be trademarks or registered trademarks of their respective owners.

Contacting us

If you have questions or suggestions regarding the product or this documentation, please contact your local SIEMENS representative.

Siemens Building Technologies

Fire & Security Products GmbH & Co. oHG

D-76181 Karlsruhe

You can also visit our Web site at www.sbt.siemens.com.

Training courses

Siemens Fire Safety & Security Products provides training courses for all products.

About this document

This manual provides the information you will need in order to install and configure a Solaris™ Dome unit. We recommend that you read through it at least once before you begin the installation.

Orientation guide

Tips and information

Image 2
Contents Configuration Manual Contacting us CopyrightTrademarks Training coursesContents 10.1 Page Installation SafetyGeneral safety precautions Target readersCleaning Meaning of the signal wordsMeaning of the hazard symbols Damage due to unsuitable mounting locationEU directives European Directive 2004/108/EC Electromagnetic CompatibilitySpecifications Image System DescriptionPackage contents Ordering dataCamera part and connector definition Camera part definitionConnector pin definition Power adaptor Installing the cameraPrecautions SD memory cardSwitch Setting network camera environmentSpecifications Concept of the network cameraIP address Connecting the camera and personal computer via networkConnection configuration Connecting camera and personal computer Click the Home page of selected device button Using the camera search application IpFinderSetting up IpFinder Using the camera search application Web cam IP manager Ssdp Simple Service Discovery Protocol / network protocolLog-in screen Administrator Log-inPreparations before displaying z Enable cookies Viewing and listeningBrowser setting when proxy server is used Log-in the cameraCamera Image screen Components of unit homeCompression ConfigurationImage mode Unicast Streaming Multicast StreamingHow to operate Rtsp Select Open URL For example rtsp//192.168.0.194554/livestreamNetwork Settings in the Configuration menu Network settingsBasic Settings Ddns Settings FTP ServerImage parameters Camera Basic settingSelect Image Parameters in the Configuration menu Image colour Camera-mask zone settings PictureCamera cropping settings Configuration Alarm Camera OSD settingsExternal digital input Motion detection settings Alarm output Audio EventFTP recording conditions RecordFTP recording FTP Server Settings Server 1 Connecting method SD Card Back Up if FTP FailSD recording Configuration Emailing recording Authentication settingCondition settings for sending e-mail by schedule Mail to Address List Condition settings for sending e-mail by alarmCondition settings for sending e-mail by motion NAS recording Configuration Audio output AudioAudio input Date/Time Access protection Password AdministratorAdministrator Functions User listForbidden Ports FirewallIP Address Filter System SettingUpdate Forbidden ProtocolConfiguration Remote TemperatureBackfocus Information 11 LogEvent Log Utility program application NAS player setupAudio record setup Playing back NAS fileFirmware update setup Perform firmware update in the following sequenceMaintenance DisposalKeyword index Jpeg LEDKeyword index A6V10236123