Siemens CCMX1315-LP configurationmanual System, Forbidden Protocol, Setting, Update

Page 51

Configuration

7.9.3Forbidden Protocol

ICMP or UDP protocol can be rejected by firewall if assigned.

7.10System

7.10.1Setting

CGI-Lock is a system security setting. It means you can activate or deactivate the login data for the CGI-commands. If you set ON, you always have to enter an ID and password for the web-page, but besides you can change everything using the cgi-commands. Otherwise, it’s not necessary for the login data if you choose OFF.

7.10.2Update

You can update system firmware once the update file is available. It is the customer's responsibility to update firmware. All camera motions will shut down during firmware update. Close any other screens before starting a firmware update. Never disconnect power and LAN cable during the firmware update process. Rebooting the camera after firmware update may take approx. 15 minutes.

The power supply to the camera must not be interrupted during the SW update.

SIGNALWORT Otherwise the camera will be damaged and have to be returned to the workshop for repair.

.

	51

Siemens Building Technologies
Fire Safety & Security Products	01.2009

Image 51

Contents Configuration Manual Training courses CopyrightTrademarks Contacting usContents 10.1 Page Target readers SafetyGeneral safety precautions InstallationDamage due to unsuitable mounting location Meaning of the signal wordsMeaning of the hazard symbols CleaningEuropean Directive 2004/108/EC Electromagnetic Compatibility EU directivesImage System Description SpecificationsOrdering data Package contentsCamera part definition Camera part and connector definitionConnector pin definition SD memory card Installing the cameraPrecautions Power adaptorConcept of the network camera Setting network camera environmentSpecifications SwitchConnecting the camera and personal computer via network Connection configurationIP address Connecting camera and personal computer Using the camera search application IpFinder Setting up IpFinderClick the Home page of selected device button Ssdp Simple Service Discovery Protocol / network protocol Using the camera search application Web cam IP managerViewing and listening Administrator Log-inPreparations before displaying z Enable cookies Log-in screenLog-in the camera Browser setting when proxy server is usedComponents of unit home Camera Image screenConfiguration Image modeCompression Multicast Streaming Unicast StreamingHow to operate Rtsp For example rtsp//192.168.0.194554/livestream Select Open URLNetwork settings Basic SettingsNetwork Settings in the Configuration menu FTP Server Ddns SettingsCamera Basic setting Select Image Parameters in the Configuration menuImage parameters Image colour Picture Camera-mask zone settingsCamera cropping settings Configuration Camera OSD settings AlarmExternal digital input Motion detection settings Audio Event Alarm outputRecord FTP recordingFTP recording conditions FTP Server Settings Server 1 SD Card Back Up if FTP Fail Connecting methodSD recording Configuration Authentication setting Condition settings for sending e-mail by scheduleEmailing recording Condition settings for sending e-mail by alarm Condition settings for sending e-mail by motionMail to Address List NAS recording Configuration Audio Audio inputAudio output Date/Time Access protection User list AdministratorAdministrator Functions PasswordFirewall IP Address FilterForbidden Ports Forbidden Protocol SettingUpdate SystemConfiguration Temperature BackfocusRemote 11 Log Event LogInformation Playing back NAS file NAS player setupAudio record setup Utility program applicationPerform firmware update in the following sequence Firmware update setupDisposal MaintenanceJpeg LED Keyword indexKeyword index A6V10236123