Siemens CCMX1315-LP configurationmanual Using the camera search application Web cam IP manager

Page 18

Installing the camera

6.6Using the camera search application "Web cam IP manager"

This assumes that:

The Web-Cam IP Manager and all the units are located in the same network segment. If a device and the Web-Cam IP Manager are not located in the same network segment, you must ensure that the associated gateway (router) passes the SSDP multicast messages sent by the Web-Cam IP Manager to the network segment where the device is located.

SSDP (Simple Service Discovery Protocol / network protocol)

1.Start the Web-Cam IP Manager by loading IP Manager.exe. This application is found on the CD included with delivery.

ÎThe Web-Cam IP Manager program window will open:

2.Click the Start button.

ÎThe Web-Cam IP Manager program window will now display a list of all the devices available for communication along with their IP and MAC addresses. Each device's IP address or MAC address is unique.

3.Select the device whose home page you want to access.

4.Click the Home page of selected device button.

ÎThe home page of the selected device will appear. See Section 6.8: Viewing and listening.

18

Siemens Building Technologies
Fire Safety & Security Products	01.2009

Image 18

Contents Configuration Manual Contacting us CopyrightTrademarks Training coursesContents 10.1 Page Installation SafetyGeneral safety precautions Target readersCleaning Meaning of the signal wordsMeaning of the hazard symbols Damage due to unsuitable mounting locationEU directives European Directive 2004/108/EC Electromagnetic CompatibilitySpecifications Image System DescriptionPackage contents Ordering dataCamera part and connector definition Camera part definitionConnector pin definition Power adaptor Installing the cameraPrecautions SD memory cardSwitch Setting network camera environmentSpecifications Concept of the network cameraConnecting the camera and personal computer via network Connection configurationIP address Connecting camera and personal computer Using the camera search application IpFinder Setting up IpFinderClick the Home page of selected device button Using the camera search application Web cam IP manager Ssdp Simple Service Discovery Protocol / network protocolLog-in screen Administrator Log-inPreparations before displaying z Enable cookies Viewing and listeningBrowser setting when proxy server is used Log-in the cameraCamera Image screen Components of unit homeConfiguration Image modeCompression Unicast Streaming Multicast StreamingHow to operate Rtsp Select Open URL For example rtsp//192.168.0.194554/livestreamNetwork settings Basic SettingsNetwork Settings in the Configuration menu Ddns Settings FTP ServerCamera Basic setting Select Image Parameters in the Configuration menuImage parameters Image colour Camera-mask zone settings PictureCamera cropping settings Configuration Alarm Camera OSD settingsExternal digital input Motion detection settings Alarm output Audio EventRecord FTP recordingFTP recording conditions FTP Server Settings Server 1 Connecting method SD Card Back Up if FTP FailSD recording Configuration Authentication setting Condition settings for sending e-mail by scheduleEmailing recording Condition settings for sending e-mail by alarm Condition settings for sending e-mail by motionMail to Address List NAS recording Configuration Audio Audio inputAudio output Date/Time Access protection Password AdministratorAdministrator Functions User listFirewall IP Address FilterForbidden Ports System SettingUpdate Forbidden ProtocolConfiguration Temperature BackfocusRemote 11 Log Event LogInformation Utility program application NAS player setupAudio record setup Playing back NAS fileFirmware update setup Perform firmware update in the following sequenceMaintenance DisposalKeyword index Jpeg LEDKeyword index A6V10236123