Siemens CCMX1315-LP configurationmanual Configuration, Compression, Image mode

Page 22

Configuration

7 Configuration

7.1Compression

Image mode

zBoth functions of JPEG and MPEG4 are effective.

zTwo streams, 1 & 2 available for selection. Stream 1 can be set to JPEG and MPEG4, but only JPEG available for Stream 2

JPEG

The following settings are enabled when "Compression Mode" is set to "JPEG".

z Resolution

Configure resolution. Higher resolution results in larger image

Possible settings1280×960 (4 VGA)640×480 (VGA)320×240 (QVGA)

z Compression Ratio

Set quality of delivered images. The size of image files (JPEG files) varies in accordance with compression ratio. Five options are available from Low to High

Low compression: This setting produces highest image quality. The file size increases.

Mid compression: Standard setting.

High compression: This setting produces lowest image quality. The file size decreases.

 

z Frame Rate: seven frame rates – 1, 2, 3, 5, 10, 12, 25 – are available for

 

selection.

22

 

Siemens Building Technologies

 

Fire Safety & Security Products

01.2009

Image 22
Contents Configuration Manual Contacting us CopyrightTrademarks Training coursesContents 10.1 Page Installation SafetyGeneral safety precautions Target readersCleaning Meaning of the signal wordsMeaning of the hazard symbols Damage due to unsuitable mounting locationEU directives European Directive 2004/108/EC Electromagnetic CompatibilitySpecifications Image System DescriptionPackage contents Ordering dataCamera part and connector definition Camera part definitionConnector pin definition Power adaptor Installing the cameraPrecautions SD memory cardSwitch Setting network camera environmentSpecifications Concept of the network cameraConnection configuration Connecting the camera and personal computer via networkIP address Connecting camera and personal computer Setting up IpFinder Using the camera search application IpFinderClick the Home page of selected device button Using the camera search application Web cam IP manager Ssdp Simple Service Discovery Protocol / network protocolLog-in screen Administrator Log-inPreparations before displaying z Enable cookies Viewing and listeningBrowser setting when proxy server is used Log-in the cameraCamera Image screen Components of unit homeImage mode ConfigurationCompression Unicast Streaming Multicast StreamingHow to operate Rtsp Select Open URL For example rtsp//192.168.0.194554/livestreamBasic Settings Network settingsNetwork Settings in the Configuration menu Ddns Settings FTP ServerSelect Image Parameters in the Configuration menu Camera Basic settingImage parameters Image colour Camera-mask zone settings PictureCamera cropping settings Configuration Alarm Camera OSD settingsExternal digital input Motion detection settings Alarm output Audio EventFTP recording RecordFTP recording conditions FTP Server Settings Server 1 Connecting method SD Card Back Up if FTP FailSD recording Configuration Condition settings for sending e-mail by schedule Authentication settingEmailing recording Condition settings for sending e-mail by motion Condition settings for sending e-mail by alarmMail to Address List NAS recording Configuration Audio input AudioAudio output Date/Time Access protection Password AdministratorAdministrator Functions User listIP Address Filter FirewallForbidden Ports System SettingUpdate Forbidden ProtocolConfiguration Backfocus TemperatureRemote Event Log 11 LogInformation Utility program application NAS player setupAudio record setup Playing back NAS fileFirmware update setup Perform firmware update in the following sequenceMaintenance DisposalKeyword index Jpeg LEDKeyword index A6V10236123