Fairchild CAM/CCD-2KCL.TDI, CAM/CCD-4KCL.TDI user manual Cbr, Led, Sap, Rap

CBR

This command allows you to change the Baud Rate. You will not see anything on your monitor.

Here is a table of stored rates in the camera…Value Function

1	9600
2	19200
3	38400 (Default)
4	57600
5	115200

If you can’t resist changing the baud rate, select the appropriate single digit number and hit enter.

LED

This command allows you to change the color. When selecting the option you need to, enter the appropriate single digit number and hit enter. Your screen will be blank during this command. You can input one of the following:

Value	Function
0	Amber
1	Green
2	Red
3	Off

SAP

Store in Flash both correction memories, all registers and DAC values.

	Value	Function
Store all parameters	0	Default factory calibrate
	1	User
	2	User

The power on values will be the last saved from SAP (X).

RAP

Load from flash to camera. Recall all parameters

	Value	Function
	0	Default factory calibration
	1	User
	2	User
SBS
	Value	Function
Set bit shift	0	10 bit
	1	9 bit
	2	8 bit

Fairchild Imaging • CAM/CCD 2KCL.TDI & CAM/CCD-4KCL.TDI Line Scan Camera User’s Manual • Rev C• 19 of 30