Fairchild Camera Specification CAM/CCD-2KCL.TDI & CAM/CCD-4KCL.TDI, Performance Specification

1.2Camera Specification: CAM/CCD-2KCL.TDI & CAM/CCD-4KCL.TDI

Performance Specification

				2048			4096
Calibration Conditions		Units	Min.	Typ.	Max.	Min	Typ.	Max.	Notes
Data Rate (Strobe)		MHz		25	25		25	25
Line Rate (LVAL)		KHz	0.3		46.0	0.3		23	8
Functions		Units	Min	Typ	Max	Min	Typ	Max	Notes
Saturation Output Amplitude		DN		250	255		250	255
Output Gain Mismatch		DN		2	5		2	5
Pixel Response Non-Uniformity Global		DN		5	12		5	12
(PRNU)	Tap	DN		4	10		4	10	1, 3,4
	Pixel-Pixel	DN		4	10		4	10	7
Fixed Pattern Noise (FPN)	Global	DN			3			3	3,4
	Tap	DN			2			2	1, 3
	Pixel-Pixel	DN			2			2	3, 4
DC Offset		DN			4			4	2
DC Offset Mismatch		DN			2			2
Random Noise		DN		2	4		2	4
Noise Equivalent Exposure		pJ/cm2		1.2	3		1.2	3
Saturation Equivalent Exposure		nJ/cm2		.8	1.0		.8	1.0
Responsivity		DN/(nJ		250			250
		/cm2)
Dynamic Range		Ratio	600:1				600:1
Power Supply Current @ 12VDC		mA		400			420		6,9
Power Supply Voltage		Volts	10.5	12	15.0	10.5	12		15.0
Operating Temperature		°C			40			40
First Pixel Mismatch		DN							5

Notes:

DN = Digital Numbers, also known as “levels” (0 – 255 for 8-bit systems).

All measurements taken with camera operating in 96 stage mode.

All measurements exclude the last pixel of OS 1 and the first pixel of OS4

1.Measured across 1 tap (512 pixels) or (1024 pixels)

2.Typical offset @ 20°C ambient

3.Excludes last pixel of OS1 and first pixel

4.Measured across all taps.

5.Measured on each tap relative to next ten pixels. Measured at Vsat.

6.Measured with digital outputs, terminated.

7.A delta window of 8 pixels is examined and shifted by half its window. First and last pixel excluded from each tap.

8.Camera will operate below min. line rate with degraded performance.

Fairchild Imaging • CAM/CCD 2KCL.TDI & CAM/CCD-4KCL.TDI Line Scan Camera User’s Manual • Rev C• 8 of 30