VIEWING THE DEMONSTRATION (DEMONSTRATION)
•Demonstration automatically shows you the major functions that are included with
• | your camcorder so that you may use them more easily. | CARD | TAPE | MODE |
The demonstration function may only be used in the Camera mode without a tape | (VP-D385( i ) only) |
| ||
|
|
| ||
• | inserted in the camcorder. ➥page 18 |
|
|
|
Before you begin: Make sure that there is no tape inserted in the camcorder. |
|
|
| |
• | ➥page 34 |
|
|
|
The demonstration operates repeatedly until the demonstration mode is switched off. |
|
|
| |
1.Set the Select switch to TAPE. (VP-D385( i ) only)
2.Press the MODE button to set Camera ( 
).
3.Press the MENU button.
•The menu list will appear.
4.Move the Joystick (▲ / ▼) up or down to select "System", then press the Joystick or move the Joystick ()to the right.
5.Move the Joystick (▲ / ▼) up or down to select "Demonstration", then press the Joystick.
6.Move the Joystick (▲ / ▼) up or down to select "On", then press the Joystick.
7.Press the MENU button.
•The demonstration will begin.
8.To quit the demonstration, press the MENU button.
•The demonstration function is automatically activated when the camcorder is left idle for more than 10 minutes after switching to the Camera mode (if no tape is inserted in the camcorder).
•If you press other buttons (MENU, Joystick, EASY.Q...) during the demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
•The demonstration mode displays in 4:3 aspect ratio on the LCD screen.
Camera Mode |
| |
System |
|
|
Clock Set | � On | |
Remote |
| |
Beep Sound | � On | |
Shutter Sound | � On | |
Language | � English | |
Demonstration | � On | |
Move | Select | MENU Exit |
Camera Mode |
| |
System |
|
|
Clock Set |
| |
Remote |
|
|
Beep Sound |
| |
Shutter Sound |
| |
Language | Off | |
Demonstration | ✔ On | |
Move | Select | MENU Exit |
SAMSUNG Camcorder is...
34x Optical Zoom
1200x Digital Zoom
Demonstration
English _29