Audio Dubbing (vp-d382( i )/D382H/d385( i ) only)
• | This feature enables you to dub your voice through the internal microphone or other |
| STOP SP | 0:00:00 |
| audio equipment onto a | 16:9 Wide | 10Sec | 60min |
• | The original sound on the tape will not be erased. |
|
| S 16BIt |
The Audio Dubbing function works only in Player mode. ➥page 18 |
| No Tape ! |
| |
• | You can not dub sound on a | M 1/50 |
| |
• You can add sound to the original sound on a | 29 |
|
| |
| W | T | ||
| with 12bit sound. | 12:00 1.JAN.2008 | C.Nite 1/30 | |
|
| |||
1. Set the Select switch to TAPE. (VP-D385( i ) only).
2. Press the MODE button to set Player ( 
).
3. Move the Joystick (/) left or right and find the time frame of the scene to be dubbed.
4. | Press the Joystick to playback, and press it again to pause the scene. | |
| • | If you want to resume to playback, just press the Joystick again on playback. |
5. | Press the A.DUB button on the remote control. | |
| • | Audio dubbing ( ) indicator is displayed. |
| • | The camcorder is ready for dubbing. |
|
| <VP-D382( i )/D382H/D385( i ) only> |
6.Press the (PLAY) button (on the remote control) or Joystick to start dubbing.
•Press the ■ (STOP) button (on the remote control) or move down the Joystick (▼) to stop the dubbing.
•You can not use the Audio Dubbing function while playing a write protected video tape.
•To utilize an external sound source, use the Audio/Video cable to connect external sound source input.
To dub from an external sound source, set "AV In/Out" function to "In".
English _65