Setting the Digital Image Stabilizer (DIS)
• The DIS function works only in Camera mode. ➥page 18 |
|
|
|
|
| |
• | DIS (Digital Image Stabilizer) is a function that compensates for any shaking | CARD |
|
| TAPE | MODE |
| or hand movement while holding the camcorder (within reasonable limits). |
|
|
|
|
|
• | (VP-D385( i ) only) |
| ||||
It provides more stable pictures when: |
|
|
|
|
| |
- Recording with the zoom
- Recording a small object
- Recording and walking at the same time
- Recording through the window of a vehicle
1.Set the Select switch to TAPE. (VP-D385( i ) only).
2. | Press the MODE button to set Camera ( | ). | Camera Mode |
| |
Camera |
|
| |||
3. | Press the MENU button. |
| Program AE | � Auto | |
| • The menu list will appear. |
| White Balance | � Auto | |
|
| Visual Effect | � Off | ||
4. | Move the Joystick (▲ / ▼) up or down to select "Camera", then press the | 16:9 Wide | � On | ||
Macro |
| � Off | |||
| Joystick or move the Joystick () to the right. | DIS |
| � Off | |
5. | Move the Joystick (▲ / ▼) up or down to select "DIS", then press the Joystick. | Move | Select | MENU Exit | |
|
|
| |||
6.To activate the DIS function, move the Joystick (▲ / ▼) up or down to select "On",
then press the Joystick. | Camera Mode |
| |||
• If you do not want to use the DIS function, set the "DIS" menu to "Off". | Camera |
|
| ||
Program AE |
| ||||
7. To exit, press the MENU button. | White Balance |
| |||
Visual Effect | Off | ||||
• | DIS ( | ) indicator is displayed. | Macro |
| |
|
|
| 16:9 Wide |
| |
| • EASY.Q mode automatically sets the "DIS" to "On". | DIS |
| ✔ On | |
|
|
| MENU Exit | ||
| • You cannot set the following functions in the DIS mode. | Move | Select | ||
|
|
|
| ||
:"Mosaic", "Mirror", "Emboss2", "Pastel1", "Pastel2", "C.Nite",
| "Digital Zoom" | 16:9 Wide | STBY SP | 0:00:10 |
• | Setting the DIS function in 16:9 Wide mode may produce lower quality than in | 10Sec | 60min | |
|
| S 16BIt | ||
• | normal mode. |
|
|
|
When you press the PHOTO button while the DIS function is enabled, the DIS will be | M 1/50 | No Tape ! |
| |
• | released shortly and resume automatically after recording a photo image on a tape. | 29 |
|
|
It is recommended that you deactivate the DIS function when using a tripod. |
|
| ||
| W | T | ||
• | If you use the DIS function, the picture quality may deteriorate. | 12:00 1.JAN.2008 | C.Nite 1/30 | |
English _55