
CUTTING OFF WIND NOISE (WINDCUT PLUS)
•The windcut plus function works in both Camera and Player (Audio dubbing) modes. ➥page 18
•Use the windcut plus when recording in windy places such as the beach or near buildings.
•The windcut plus function minimises wind or other noises while recording.
-When the windcut plus is on, some low pitched tones are eliminated along with the sound of the wind.
1.Set the Select switch to TAPE. (VP-D385( i ) only)
2.Press the MODE button to set Camera ( ) or Player (
).
3.Press the MENU button.
•The menu list will appear
4.Move the Joystick (▲ / ▼) up or down to select "Record", then press the Joystick or move the Joystick () to the right.
5.Move the Joystick (▲ / ▼) up or down to select "WindCut Plus", then press the Joystick.
6.To activate the windcut plus function, move the Joystick (▲ / ▼) up or down to select the windcut plus type, then press the Joystick.
•"Off": Disables the function
•"Auto": Minimises the wind noise while preserving voices.
•"On": Removes the low pitched wind noise.
7.To exit, press the MENU button.
•WindCut Plus ( "On" ( ) or "Auto" (
)) indicator is displayed.
Make sure windcut plus is set to off when you want the microphone to be as sensitive as possible.
CARD | TAPE | MODE |
(VP-D385( i ) only) |
| |
|
| BATT. |
BATT.
Camera Mode |
| |
Record |
|
|
Rec Mode |
| |
Audio Mode |
| |
WindCut Plus | Off | |
Real Sterco | Auto | |
|
| ✔ On |
Move | Select | MENU Exit |
STBY SP | 0:00:30 |
16:9 Wide 10Sec | 60min |
| S 16Bit |
| C.Nite 1/30 |
English _45