Yamaha DVX-S100 Selecting PRO Logic, Playing Dolby Digital Surround EX or DTS ES software

Page 30

BASIC PLAYBACK

Selecting PRO LOGIC II

You can enjoy the 2-channel sources decoded into five discrete channels by selecting PRO LOGIC II in program No. 9.

(While playing a 2-channel source)

1Press AMP.

2Press q/DTS.

The previously selected sub program appears on the front panel display.

3Press SELECT repeatedly to select the decoder, PRO LOGIC II.

4After selecting on the decoder (PRO LOGIC II), select the mode appropriate for the source by pressing q/DTS.

The selection switches as follows;

PRO LOGIC II Movie PRO LOGIC II Music

y

You can select PRO LOGIC, PRO LOGIC II Movie, and PRO LOGIC II Music by pressing DSP H/G on the front panel repeatedly.

Note

Playback using DOLBY PRO LOGIC II decoders is possible only for 2-channel signals.

Playing Dolby Digital Surround EX or DTS ES software

Press MATRIX 6.1 to turn on the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder.

The rear center channel is created from rear left and right channels, and output from virtual rear center speaker.

The display changes AUTO ^ Matrix6.1 ^ OFF each time the MATRIX 6.1 button is pressed.

• AUTO:

This mode automatically switches Dolby

 

Digital + Matrix 6.1 and DTS + Matrix 6.1

 

depending on the signal. Virtual rear center

 

speaker does not work for 5.1 channel

 

sources.

Matrix6.1: This setting produces 6-channel playback of the input source using the Matrix 6.1 decoder. The virtual rear center speaker can

be used when playing a 5.1-channel source.

• OFF: Virtual rear center speaker does not work in this setting.

y

When the Matrix 6.1 decoder is functioning, the “MATRIX” indicator lights up on the front panel display.

Notes

Some Dolby Digital Surround EX or DTS ES software may not contain the signal that is necessary for this unit to switch to the Matrix 6.1 decoding mode. To turn on the Matrix 6.1 decoder when playing such a source, select “Matrix6.1”.

Playing a 6.1-channel source is not possible even if MATRIX6.1 is pressed in the following cases:

when “1C REAR LR” in the SET MENU is set to NON;

when the sound effect is turned off;

when headphones are connected;

when a Dolby Digital KARAOKE source is being played;

when 5ch Stereo is selected.

The setting becomes AUTO once this unit turns into standby mode.

Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all DSP programs without rear speakers. It creates virtual speakers to reproduce a natural sound field.

You can listen to virtual CINEMA DSP by setting “1C REAR LR” in the SET MENU to NON. Sound field processing changes to VIRTUAL CINEMA DSP automatically.

y

When virtual CINEMA DSP is functioning, the “VIRTUAL” indicator lights up on the front panel display.

Note

This unit is not set in the virtual CINEMA DSP mode even if “1C REAR LR” is set to NON in the following cases:

when the 5ch Stereo, DOLBY DIGITAL Normal, Pro Logic Normal, Pro Logic II, or DTS Normal program is selected;

when the sound effect is turned off;

when 96-kHz sampling digital signals are input to this unit;

when using the test tone; or

when connecting the headphones.

26

Image 30
Contents DVX-S100 Important Safety Instructions Explanation of Graphical SymbolsFCC Information for US customers only Example of Antenna GroundingWe Want You Listening For a Lifetime For Canadian CustomersContents Features About this manualDVR-S100 Checking the AccessoriesInstalling Batteries in the Remote Control NX-SW100 NX-S100S x4, NX-S100C, SW-S100Controls and Functions Front panelSTANDBY/ON Introduction Input H/GLevel Remote control AMP modeCode SET TestUsing the remote control Handling the remote controlApproximately 6 m 20 feet Front panel display left Front panel display right After connecting components Before connecting componentsAdjusting speaker output levels P.20 Preparation StepsSpeaker Setup Speaker placementPreparation Mounting the front and rear speakers Installing the speakersPlacing the center speaker Placing the front and rear speakersHang the holes on the protruding screws Types of video jacks ConnectionsComponents Types of audio jacksFor Video Component Connection exampleFor Audio component For A/V componentConnecting the AM loop antenna Connecting the antennasConnecting indoor FM antenna Set up the AM loop antenna, then connect itGreen Connecting the speakersRED White Gray BlueUsing commercially available speakers and speaker cables Exchanging the speaker cablesTurning on the power Connecting to an external AmplifierConnecting the AC power cord Memory back-upLeft Right Center Subwoofer SUR Adjusting Speaker Output LevelsUsing the test tone AMPEnhancing the bass tones Basic PlaybackBasic operations To mute the soundWhen you have finished using this unit Setting the sleep timerInput modes and indications Selecting a sound field program Feature of DSP programsUsing Basic FunctionsTV Sports Program FeaturesCINEMA-DSP for cinema sources Mono MovieUsing Basic Functions Table of Program Names for Each Input FormatMeans the Matrix 6.1 decoder is on Virtual Cinema DSP Selecting PRO LogicPlaying Dolby Digital Surround EX or DTS ES software While playing a 2-channel source Press AMP Press q/DTSDisplaying the information about input signal Normal Stereo ReproductionSpecial considerations when recording DTS software Timer playback/recordingRecording Playing a Disc Disc InformationTypes of disc that this unit can Play This manual, the type of discs are indicated as belowStarting play from a selected chapter MP3 playbackStructure of the disc example Repeat playPlay Mode Remote Control DVD ModeSetup SubtitleTo stop playback Playing a DiscBasic operation After operationSearch SkipTo select a specific track PauseTo turn the screen off ON-SCREEN MenuOperating menu bar To change the menu bar positionSignal type/data Icons for disc menuLanguage Display menu Play mode menuIcons for player menu Audio menuTo change the user mode Digital picture modeTransfer Mode Shuttle screenEnhancing video quality U.S.A Canada models only Using Multiple FunctionsUsing a disc’s menu Video CD’s playback control VCDTo play a track on a specific group Adjusting the screen position when using progressive outputSave the adjusted position A. and Canada modelsTo change pages Enhancing audio quality DiscTo play a bonus group Press a to stop play Press Group while pressing ShiftAngles Audio tracksSubtitles To turn the icon offCase of DVD-Audio Press a to stop play Press Play Mode while pressing ShiftProgrammed play Press a to stop playTo change or add to the program during programmed play To cancel the programmed tracksTo exit programming mode To move up and down the pages on the program screenTo play from the marked point To cancel random modeRandom play DVD-Audio To clear a bookmarkDVD-Video Program repeatRandom-sequence repeat DVD-Audio/Video-CD/CDTo cancel A-B repeat Press A-B while pressing ShiftRepeat A-BDVD-A DVD-V VCD CD To get out from the setup menu mode Setup MenuOperating the setup menu To go back to the previous screenSummary of settings Menu groups Items OptionsDVD-A DVD-V Mpeg DVD-A DVD-V VCDOthers DVD-Video Mode Language selection and language code listLanguage code list DemoSetting method Level To change settings Level 7 toIf you have forgotten your password Ratings DVD-VSpeaker settings DVD-A DVD-V Output modeDifference Setting To exit the speaker setting modeDifference Setting Speaker balanceAutomatic tuning TuningAutomatic and manual tuning Manual tuningManually presetting stations Presetting stationsAutomatically presetting stations for FM stations TuningRepeat steps 1 to 5 to store other stations Tuning in to a preset stationPress PRESET/BAND again SecondsYou can release Code SET after entering the code Setting the manufacturer codeRemote Control Features MD/CD-R0, ≥10 Table of control buttonsCD/MD recorder CH +SET Menu Adjusting the items on the SETAdjustments List of SET Menu items1B Front front speaker mode Settings1A Center center speaker mode 1C Rear LR rear speaker modeSwfr 1D Bass LFE/bass out mode1E F. Level front level mode BothR Balance balance Front left and right speakers SP DLY Time speaker delayRange dynamic range ControlOptical Input jack Input Mode initial inputSP/PRE OUT output source Settings Coaxial Input jackFor 5ch Stereo Adjusting the Level of the Effect SpeakersPress j / i to adjust the speaker output level LevelAdjusting the delay time Following table shows factory-set delay timeDimension Adjusting the parameter settings for PRO Logic II MusicChanging parameter settings PRO Logic II Music parameter descriptionsGeneral TroubleshootingProblem Cause Remedy Refer AppendixCenter speaker Volume levelNo sound from Rear speakersProblem Cause Disc playbackRemedy Refer On the unit’s display This unit does notRemote control TunerGlossary Cinema DSPInterlace and progressive output Video signal Silent CinemaSpecifications List of MANUFACTURER’S Codes VCRCDR Kenwood Pioneer SharpV883340-1