■SILENT CINEMA DSP
You can enjoy a powerful sound field similar to what you could expert from actual speakers with SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES (
SILENT) jack while the digital sound field processor is on. Enjoy all the DSP program using the headphones. The “SILENT” indicator lights up on the front panel display. (When sound effects are off, you listen to the source with normal stereo reproduction.)
y
•When SILENT CINEMA DSP is functioning, the “SILENT” indicator lights up on the front panel display.
Notes
•This feature is not available when
•The sound of LFE channel will be mixed and output from the headphone.
■Normal Stereo Reproduction
Press STEREO to turn off the sound effect for normal stereo reproduction.
Press STEREO again to turn the sound effect back on.
Notes
•If you turn off the sound effects, no sound is output from the center or rear speakers.
•The volume may be greatly reduced when you turn off the sound effects or if you set “4 D. RANGE” on the SET MENU to MIN. In this case turn on the sound effect.
•The sound of LFE channel will be directed to the front left and right or the subwoofer (or both) channels depending on the setting of “1D BASS” on the SET MENU.
•If you turn off the sound effects while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the front speakers.
■Displaying the information about
input signal
During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this system.
(While playing a stereo source)
1 Press AMP.
2 Press d to display the information about the input signal.
BASIC PLAYBACK
y
•Format:
The type of an input signal. When digital input is not known, the mode is set to the analog mode.
Input signal | Display |
Analog signal | Analog |
|
|
PCM signal | PCM |
|
|
Dolby Digital signal | Dolby Digital |
|
|
DTS signal | DTS |
|
|
Other digital signals | Unknwn Digital |
(Unknown Digital)
•fs:
The sampling frequency of an input signal when a digital signal is input. If the frequency is not known, “unknown” appears on the front panel display.
•Audio Channels:
The number of audio channels included in an input signal when a Dolby Digital or DTS signal is input.
•Rate (bit rate):
The amount of data contained in an input signal per second when a Dolby Digital or DTS signal is input. If the bit rate is not known, “unknown” appears on the front panel display.
•Flg (flag):
An identification signal contained in an input signal when a Dolby Digital or DTS signal is input. If the flag is not detected, “None” appears on the front panel display.
■About 96-kHz sampling digital signals
The digital input jacks of this system can handle
–DSP programs cannot be selected.
–Sound will be output as
USING BASIC FUNCTIONS
English
25