RECORDING
Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components.
1 Turn on the power of this system and all connected component.
2 Select the source component you want to record from.
The procedure for selecting an input source is the same as the one described in “BASIC PLAYBACK” on page 19.
3 Start playback (or select a broadcast station) on the source component.
4 Start recording on the recording component.
Notes
•Do a test recording before you start an actual recording.
•When this system is set in the standby mode, you cannot record between the components connected to this system.
•The setting of BASS BOOST, VOLUME, “5 L/R BALANCE” on the SET MENU and DSP programs does not effect the recorded material.
•The signal input from VCR IN is not output to VCR OUT.
•Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.
•It is not possible to record the sound effect created by this system’s DSP processing.
If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.
■Timer playback/recording
This system can perform playback or recording with an external timer (not supplied). Refer to the operating instructions for the component and the timer to be used.
Notes
•Stored data, such as input source, will be reflected when playback or recording with the timer.
•If you do not want any sound output when recording with a timer, turn the volume down.
26