Yamaha AVX-S80 settings, SPEAKER SET speaker mode, 1A CENTER center speaker mode, Large, Small

SET MENU

1 SPEAKER SET (speaker mode

settings)

Use this feature to select suitable output modes for your speaker configuration.

If you do not use one or any of the included speakers, or if you use other speakers instead of the included speakers, set the following.

Note

•When 96-kHz sampling digital signals are input to this system, some items are not affected.

■1A CENTER (center speaker mode)

By adding a center speaker to your speaker configuration, this system can provide better dialog localization for several listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.

SML

Select this if you have a small center speaker. The low- frequency signals (90 Hz and below) of the center channel are directed to the speakers selected with “1D BASS”.

NON

Select this if you do not have a center speaker. All of the center channel signals are directed to the front left and right speakers.

■1B FRONT (front speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large front speakers. The entire range of the front left and right channel signal is directed to the front left and right speakers.

SMALL

Select this if you have small front speakers. The low- frequency signals (90 Hz and below) of the front channel are directed to the speakers selected with “1D BASS”.

Note

•When you select FRONT for “1D BASS”, the low-frequency signals (90 Hz and below) of the front channel are directed to the front speakers even if you select SMALL for the front speaker mode.

■1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and right speakers or if a rear subwoofer is connected to the rear speakers. The entire range of the rear channel signal is directed to the rear left and right speakers.

SML

Select this if you have small rear left and right speakers. The low-frequency signals (90 Hz and below) of the rear channel are directed to the speakers selected with “1D BASS”.

NON

Select this if you do not have rear speakers.

y

•This system is set in the Virtual CINEMA DSP mode when you select NON for “1C REAR LR”.

36