Mounting Accessory Installation
■STB-330PPM (Paul Mount)
Compatible Models : STB-270PWV+STH-380PO/370PO/360PO/370PI
Wall type mount | 1. Secure the pole to the mount using a wire or cable. |
| 2. Use 4 1/4" screws to secure the |
| mount to the wall. |
1/4" SCREW : 4EA
■STB-340PCM (Corner Mount)
Compatible Models :
Mounting Accessory Installation
■STB-350PPM (Parapet Mount)
Compatible Models : STB-30PF+STH-380PO/370PO/360PO/370PI
1.Drill 8 anchor bolt holes on the wall according to the holes in the parapet mount.
2.Using a tool, insert anchor bolts and then set the parapet mount on the bolts. Use 8 nuts to fasten
the bolts.
Parapet mount
Anchor bolt 8EA
3. Feed the cable through the pipe to the other end of the pipe.
Anchor bolt 8EA Corner mount
1.Drill 8 anchor bolt holes on the wall according to the holes in the corner mount.
2.Using a tool, insert anchor bolts and then set the corner mount on the bolts. Use 8 nuts to fasten the bolts.
4. Set PPE on the parapet mount.
PIPE
3.Use 1/4" screws to secure the
Wall type mount
1/4" SCREW : 4EA
5. Wind the cable to the direction shown in the picture, and then assemble the PPE cover using screws.
6.Adjust the pipe direction, and then secure the pipe using screws.
7.Install the camera.
32 SPEED DOME CAMERA ACCESSORIES | SPEED DOME CAMERA ACCESSORIES 33 |