Samsung SPD-3700T Pendant Type Installation, Securing Wall Bracket and Wiring, Preparing Housing

Pendant Type Installation

STH-	■ 3. Pendant Type Installation
380PO/370PO/370PI/360PO
	■ 3.1 Wall Mount Type Installation

STH-380PO

STH-370PO

STH-360PO

STH-370PI

STH-270PWV

Pendant Type Installation

1.Securing Wall Bracket and Wiring

As shown in the picture, secure the wall bracket to the wall, and then pull the wires out of the bracket. Please note that the STH-380PO housing requires an additional installation of the fan heater adapter enclosed with the product.

Fan Heater Adaptor

(STH-380PO Only)

Camera Adaptor

✽To store the adaptor, the STB-270B Setup Box (Page 31) can be used.

Notes

• Do not connect the camera to a power outlet until the installation is complete. Supplying power in the middle of the installation may cause fire or damage the product.

• STH -370PO requires an additional installation of the fan heater adapter enclosed with the product. Connecting the fan heater to a power outlet used for the camera can cause fire or accidents.

2. Preparing Housing	Knob
Open the hinged door at the bottom of the housing.
Hold the knob on the hinged door to open.

3.Connecting Housing and Bracket

To prevent the housing from falling down during the installation process, hook the safety cable on the bracket loop as shown in the picture.

STH-380PO/370PO/370PI/360PO

8 SPEED DOME CAMERA ACCESSORIES SPEED DOME CAMERA ACCESSORIES 9