Pendant Type Installation
STH- |
|
380PO/370PO/370PI/360PO | Fan Heater Adaptor |
| |
| Fan Heater Connector |
| (Model: |
| Camera Adaptor |
Notes
• The
• Make sure to hook the safety cable on the bracket loop before connecting the housing. • Neglecting this caution may expose you to injury caused by a fallen housing.
4.Assembling Housing and Bracket
After hooking the safety cable, fit the housing into the fixture grooves on the bracket as shown in the picture. When attaching, locate the "Samsung" logo on the housing facing the center front.
Logo
Pendant Type Installation
5. Securing Housing
Check if the housing is properly attached to the bracket, secure the housing to the bracket with the enclosed screws.
6. Wiring Terminal Cables
Connect the cables to the terminal block on the hinged door. Once the wiring is successful, close the hinged door.
✽ For the location of the wiring pins, please refer to the “Camera Wiring Diagram” on the next page.
10 SPEED DOME CAMERA ACCESSORIES | SPEED DOME CAMERA ACCESSORIES 11 |