Sony CCD-FX310 If moisture condenses Inside the unit, If moisture condenses on the lens

Page 39

..........III...................

IIthe camcorder _sbrought d_rectly from a cold place to a warm place, moLsture may condense inside the camcorder, on the surface of the tape or on the lens. In this cond_bon, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensors.

However, take the following precautions.

If moisture condenses Inside the unit

,.,,i _ .

Moisture is present inside the camcorder when:

The [] indicator in the viewfinder blinks.

When the tape is inserted, the -_ indicator also blinks.

Several beeps sound continuously for five seconds when the BEEP switch is set to ON

and the tape is inserted.

In such cases, no functions except for tape ejection work.

Eject the tape, turn off the camcorder and leave it with the cassette holder open for at least I hour.

The camcorder can be used again if the [] indicator does not appear when the power is turned on again.

If moisture condenses on the surface of the tape

Moisture is present on the surface of the tape when

The ,A indicator blinks inside the viewflnder when the

tape

is inserted and a tape transport button (D, _1_1,

_C

etc.)

is pressed.

,,'T_

Several beeps sound continuously for about five seconds when the BEEP switch is set to ON.

In such cases, no functions except for tape ejection work.

Eject the tape and let the camcorder and the tape sit for at least 1 hour.

The tape can be used again if the - indicator does not appear when the tape is inserted and a tape transport button is pressed.

If moisture condenses on the lens

No caution indicators will appear, but the picture becomes dim.

Turn off the power and don'tuse the camcorder for at least 1 hour.

How to prevent moisture condensation

When bringing the camcorder from a cold place to a warm place, put the camcorder tn a plastic bag and allow =tto adapt to room conditions over a period of time.

1Be sure to tightly seal the plastic bag containing the camcorder.

2Remove the bag when the air temperature inside it has reached the temperature surrounding it (after about one hour).

Add,tlonal Information 39

Image 39
Contents CCD FX310 Regulations Information for the customers in the U.S.AGetting Started Basic Camera Operation How to recordAdvanced Camera Operation Connecting Before You BeginWelcome to Video You also need to set the Beep switch Wireless RemoteUse the battery completely before recharging 110 Battery life and remaining capacityCassette compartment marked Push Adjustment ring Press the small Green button on PowerWhat is a sports finder? When storing your camcorderChanging the lithium battery Adjust the blinking digits of minute by pressing Date + Correcting the date and time settingsPress Time Next to set the second to Birthday Indicator appears Viewfinder How to store birth datePower switch and slide the Power To Camera CAMpV Set the Standby switch upNow itsready for recording If you missed the correct number with Date +You can see through the viewfinder Press START/STOP red button onceWhen you have finished recording Checking the time remaining on the tapeTAPEiBATT Check To zoom PhtANT Video inputs, seeWhen you have finished playback Eject the tape, see Insert a tape. SeePress Play Getting familiar with some buttons Set the Power switch on the camcorder as followsMake sure you use up Battery before recharging Battery life is shorter in cold climatesWhy the battery pack heats up? How to use the switch on the battery packRecommended temperatures during charging Place Power source Accessory to be used To remove the do pack Removeit thesame wayas youdo with the batterypack. SeepagePress START/STOP Press AGE/EVENT to select the indicator you want to recordTo cancel the stored birth date To stop recording the ageTo change the display while recording Press the side of Editsearch momentarily Hold the viewfinderwith yourthumb to preventSide for the playback picture in reverse At the desired point, release Editsearch Press START/STOP To pause recordingIf the tape reaches near the end during recording 111 Press Counter ResetRemote Accessory shoeAfter shooting Press Back LightTo choose best programmed AE mode Sports modeSet the Program AE switch to To the desired setting Press Fader while recording FADERindicatorstarts blinking When fading-outTo cancel the fade-in/out function AC-V35/V35A AC-V35/V35A a VcRITo locate the desired scene picture search To view the still picture playback pauseCounter shows Press when the playback has finished, as usualPress 11or IH At the point you later want to locateAUO,ON , DEO Pause How to connectUsing of the Edit switch To stop editingIf you use the Data Screen function If moisture condenses on the lens How to prevent moisture condensationIf moisture condenses Inside the unit If moisture condenses on the surface of the tapeTo clean the viewfinder Take a good posture for shooting To reattach the eyecupNtsc system countries Plan aheadLighting Difference In Color SystemOn care On operationDo not let sand get into the camcorder Do not let the camcorder get wetStandby switch Tape transport buttons Play playback Additional Information Additional Informatton II F£ FJit=TlvJL fl3TJm Power zoom button LiD- Slow slow playback buttonCorrective actions Atiach the battery Power does not turnSymptom CauseBeeps General Wireless Ra madSystem Input and output O.etbrInformation Center O,P