Sony CCD-FX310 operation manual Cause, Symptom, Beeps

Page 50

If an indication blinks in the viewfinder screen or a caution lamp on the main unit blinks, check the following table.

I-------

]slow

blinking

fast blinking

Symptom

c.\-J

Camera operation Battery lamp

VCR operation

Camera operation Battery lamp .........

-_Beeps

@

Cautionlamp'

Camera operation

VCR operation

,$, flashes for 5 seconds in

the viewfinder after setting the POWER switch to

CAMERA.

Cause	Corrective actions
The battery is weak.	Prepareacharged one.
The battery is used up.	Use a charged battery.
The tape is at its end.	Use a new tape.
The tape is near its	Prepare a new one.
end.
No tape is inserted.	Insert a tape.
The tab on the tape is	Slide the tab.
out (red).
Moisture condensation	Remove the tape and
has occurred.	leave the camcorder for
	at least an hour.
The gap of the head is	Clean the head using the
clogged.	Sony V8-25CLH video
	head cleaning tape.
Other troubles may	Consult your nearest
Occur.	Sony dealer.
The lithium battery is	Install a lithium battery
not installed.	with the battery pack or
The lithium battery is	other power source
exhausted.	attached. Otherwise, you
The lithium battery is	must readjust the date,
weak.	time and birth dates.

0 Additional Information

Image 50

Contents CCD FX310 Information for the customers in the U.S.A RegulationsBefore You Begin Basic Camera Operation How to recordAdvanced Camera Operation Connecting Getting StartedWelcome to Video Wireless Remote You also need to set the Beep switchUse the battery completely before recharging Battery life and remaining capacity 110Cassette compartment marked Push When storing your camcorder Press the small Green button on PowerWhat is a sports finder? Adjustment ringChanging the lithium battery Press Time Next to set the second to Adjust the blinking digits of minute by pressing Date +Correcting the date and time settings To Camera CAMpV Set the Standby switch up How to store birth datePower switch and slide the Power Birthday Indicator appears ViewfinderIf you missed the correct number with Date + Now itsready for recordingPress START/STOP red button once You can see through the viewfinderTAPEiBATT Check When you have finished recordingChecking the time remaining on the tape Pht To zoomVideo inputs, see ANTPress Play When you have finished playback Eject the tape, seeInsert a tape. See Set the Power switch on the camcorder as follows Getting familiar with some buttonsBattery life is shorter in cold climates Make sure you use up Battery before rechargingRecommended temperatures during charging Why the battery pack heats up?How to use the switch on the battery pack Place Power source Accessory to be used Removeit thesame wayas youdo with the batterypack. Seepage To remove the do packPress AGE/EVENT to select the indicator you want to record Press START/STOPTo change the display while recording To cancel the stored birth dateTo stop recording the age Side for the playback picture in reverse Press the side of Editsearch momentarilyHold the viewfinderwith yourthumb to prevent If the tape reaches near the end during recording At the desired point, release Editsearch Press START/STOPTo pause recording Press Counter Reset 111Accessory shoe RemotePress Back Light After shootingSet the Program AE switch to To the desired setting To choose best programmed AE modeSports mode To cancel the fade-in/out function Press Fader while recording FADERindicatorstarts blinkingWhen fading-out AC-V35/V35A VcRI AC-V35/V35A aTo view the still picture playback pause To locate the desired scene picture searchAt the point you later want to locate Press when the playback has finished, as usualPress 11or IH Counter showsPause How to connect AUO,ON , DEOIf you use the Data Screen function Using of the Edit switchTo stop editing If moisture condenses on the surface of the tape How to prevent moisture condensationIf moisture condenses Inside the unit If moisture condenses on the lensTo clean the viewfinder To reattach the eyecup Take a good posture for shootingDifference In Color System Plan aheadLighting Ntsc system countriesDo not let the camcorder get wet On operationDo not let sand get into the camcorder On careStandby switch Tape transport buttons Play playback Additional Information Additional Informatton Power zoom button LiD- Slow slow playback button II F£ FJit=TlvJL fl3TJmPower does not turn Corrective actions Atiach the batteryBeeps SymptomCause Input and output O.etbr Wireless Ra madSystem GeneralO,P Information Center