Make sure that the Power switch is set to OFF.
Open the LCD monitor to a 90° angle to the camcorder body.
Preparation
Preparation
Installing the Lithium Batteries
Installing the Memory Battery
The supplied CR 1216 type lithium battery is used to store the memory of the date and time settings.
1
2
3 Slide the battery release in the direction of the arrow, then take the battery pack out.
5 Insert the CR 1216 type lithium battery into the compartment with the
Hside of the battery facing out.
CR 1216 type lithium battery
6 Close the lithium battery cover firmly until it clicks into place.
Removing the Memory Battery
Perform steps 1 to 4 above, then lift out the battery by using a pointed object such as the tip of a ballpoint pen.
Battery release
4 Pull out the lithium battery cover in the direction of the arrow.
Lithium battery cover
10