Playback Functions with the Remote Control
(Not supplied)
You can use the following playback functions with the remote control (not supplied), if you purchase it as a specified part by contacting the nearest SHARP service center or your dealer. (See page 42 for use of the remote control.)
SLOW button
PAUSE/STILL button
Advance/reverse buttons
Reverse Playback
The reverse playback function allows you to play back images in reverse.
During playback, press the j button.
To return to normal playback, press the PLAY button (t).
Note:
•The camcorder automatically returns to normal playback if it is left in reverse playback for more than 30 minutes.
Slow
The slow function allows you to play back images in slow motion.
During playback, press the SLOW button (f).
Then, select the tape direction using the advance/reverse buttons (j or h).
To return to normal playback, press the PLAY button (t).
Note:
•To protect the tape, the camcorder automati- cally returns to normal playback if it is left in Slow mode for more than 10 minutes.
Frame Advance
The frame advance function allows you to play back still images frame by frame.
1 During playback, press the PAUSE/STILL button (g) to pause playback.
2 Press the h (or j) button.
•Each time you press the button, the picture advances one frame forward (or backward).
To return to normal playback, press the PLAY button (t).
Notes:
•The sound is off during reverse, slow, and frame advance playback.
•If you use the slow or frame advance function with the tape recorded in LP mode, the picture may advance several frames at a time.
•The reverse frame advance moves about 30 frames.
Useful Features
43